Contents
Preparation
Turning the power on
Turn on the Bluetooth function of the Bluetooth device that you want to
connect to beforehand.
1
Press and hold the headphones control button for
approximately 1 second
Push
1
Sec
When the pairing information is deleted, the headphones
0
automatically switch to pairing registration mode when the power
is turned on.
A beep sound is heard and the Bluetooth indicator lights purple
0
for approximately 1 second.
The power turns on and Bluetooth function turns on.
0
The headphones automatically connect via Bluetooth to the
0
Bluetooth device when the device is already paired with the
headphones. (v p. 13)
Connections
Operation
Turning the power off
1
Press and hold the control button for more than 5
seconds
0
0 If the audio cable is connected when the headphones power is on, the power
automatically turns off.
0 A small amount of power is consumed even when the power is off.
0 If the indicator does not light even when the control button is pressed, the batteries
are exhausted. Charge the batteries.
15
Troubleshooting
Push
5
Sec
A beep sound is heard and the Bluetooth indicator lights purple
for approximately 1 second.
Appendix