Reconnecting Paired Devices - Denon AH-GC20 Owner's Manual

Contents Preparation
4
Playing back music on the Bluetooth device
Music played back on the connected Bluetooth device is output from
the headphones.
0 If the power is on, turn the power off before pairing.
0 The headphones pairing registration mode is cancelled if pairing is not completed
within 3 minutes. In this case, press and hold the control button for more than 5
seconds to turn the power off, and then try pairing again.
0 If you are requested to enter a PIN code (pass key), enter "0000" (four zeros).
Connections Operation

Reconnecting paired devices

1
Turning on Bluetooth on your mobile device
0
2
Press and hold the control button for 1 second to turn
the headphones power on
0
0
13
Troubleshooting
Bluetooth ON
For details, see the Owner's Manual of the Bluetooth device that
you want to connect.
Push
1
Sec
A beep sound is heard and the Bluetooth indicator lights purple
for approximately 1 second.
The Bluetooth function turns on when the power is turned on.
Appendix