Table of Contents
Advertisement
FACTORY PRESET*
Tag8
VOLUME
SOUND INPUT
(HDMI, DisplayPort
inputs only)
AUDIO DELAY
DP EDID SOUND
SELECT
Tag9
TILE MATRIX
TagA
ROTATION
DDC/CI
SCREEN SAVER
BLANK SIGNAL SKIP Skip no signal inputs when you change input signal with INPUT button.
*1 This item does not reset by FACTORY PRESET (Tag7).
1
Selecting FACTORY PRESET allows you to reset all OSD control settings back to the
factory settings. Highlighting the control to be reset and pressing the RESET button can
reset individual settings.
Controls the volume of the speakers or headphones.
To mute the sound output, press the "RESET" button.
Selects sound input port, HDMI or DisplayPort.
HDMI input: HDMI or ANALOG.
DisplayPort input: DP or ANALOG.
For synchronizing of sounds and images, delay the audio output timing.
When OFF is selected, DisplayPort signal will not emit any sound.
You can select "OFF", when DisplayPort signals do not optimize on the native resolution.
The TILE MATRIX feature allows one image to be displayed over multiple screens.
This feature can be used with up to 25 monitors (5 vertical and 5 horizontal). Using TILE
MATRIX requires the PC output signal be sent through a distribution amplifi er to each
individual monitor.
H MONITOR: Select the number of horizontal displays.
V MONITOR: Select the number of vertical displays.
MONITOR No: Select a position to expand the screen.
TILE COMP: Works in tandem with TILE MATRIX to compensate for the width of the tile
bezels in order to accurately display the image.
Tile Comp with 4 monitors (black area shows monitor frames):
monitor2
monitor1
monitor3
monitor4
Tile Comp OFF
OSD:
LANDSCAPE: Display the OSD with landscape mode.
PORTRAIT: Display the OSD with portrait mode.
PICTURE:
OFF: The window image is not rotated.
ON: The window image always rotated.
This function allows the DDC/CI function enable or DISABLE.
Use the SCREEN SAVER to reduce the risk of image persistence.
MOTION (Default OFF): Screen image moves periodically in 4 directions in order to
reduce the risk of image retention.
Timing for MOTION can be set so the screen image moves in intervals from every
10 to 900 seconds. Timing is set in 10-second increments.
OPTION (Default REDUCED): There are two optional selections.
REDUCED: Screen image is reduced to 95% size and is moved periodically in
4 directions. Screen may appear slightly less sharp than normal. The full image appears
on the display.
NOTE: Some input signals may not be supported by REDUCED.
FULL: Screen image is set to FULL and is moved periodically in 4 directions. Screen
image goes outside of the display area in the direction that it shifts so that a portion of the
image may appear to be cut off.
NOTE: SCREEN SAVER works when ENABLE is OFF in TILE MATRIX.
English-23
monitor2
monitor1
monitor3
monitor4
Tile Comp ON
Advertisement
Table of Contents
