On the Configure CoServer Link1 page, highlight the adapter you wish
2.
to assign as CoServer Link1 in the Connection column. Select the
adapter based upon the PCI location-to-switchbay mapping you estab-
lished during planning and preparation. You can use Table 1 to assign IP
addresses for internal CLink connections.
TABLE 1.
Blade Pair 1
CoServer1
192.168.3.1
CSLink1
192.168.4.1
CSLink2
Note:
When installing multiple blade pairs, the first blade pair will have
the same IP for both the default IP and the currently configured
IP. This will not be the case for subsequent blade pairs.
Marathon Technologies Corporation
Suggested CoServer1 CLink IP Addresses
Blade Pair 2
CoServer2
CoServer1
192.168.3.2
192.168.13.1
192.168.4.2
192.168.14.1
Blade Pair 3
CoServer2
CoServer1
192.168.13.2
192.168.23.1
192.168.14.2
192.168.24.1
CoServer2
192.168.23.2
192.168.24.2
23