Rerecording (Tape Duplication) - Marantz MV5100 User Manual

MV5100 27-84 7/21/00 10:59 AM

48 Rerecording (Tape Duplication)

The instructions on this page show you how to copy tapes. Different VCRs may operate differently. To
duplicate a tape, make the connections shown, then follow steps 1-6. (You may use the AUDIO and VIDEO
or S-VIDEO In jacks on the front of VCR 2 instead if you prefer.)
VCR 1
Playing VCR
OUT IN
VIDEO
(MONO)
L
S VIDEO
CABLE BOX
AUDIO
R
OUT IN
1
VCR 1 will play your tape. Insert a prerecorded tape in VCR
1. If the tape does not have a record tab, playback begins. If this
happens, press the STOP/EJECT button on VCR 1 once.
2
VCR 2 will record your tape. Insert a blank tape in VCR 2.
Make sure the VCR power is on and the VCR is in VCR
position. (The VCR light will appear on the display panel. If it does
not, press the VCR/TV button once.)
3
Turn on the TV; set it to channel 3 or 4, whichever channel
the CH3/CH4 switch on VCR 2 is set to.
4
Point the remote control at VCR 2. Press the VCR button,
then press the Number button 0. Press the CH(annel) 8/9
button so that A/V IN FRONT (for jacks on the front) or A/V IN
REAR (for jacks on the back) appears on the screen.
5
Point the remote control at VCR 2. Press the ALT/SPEED
button to select SP or SLP.
6
Press the PLAY button on VCR 1 and the REC(ord)/OTR
button on VCR 2 at the same time. The \ light will appear
on the VCR 2 display panel.
Page 48
Recording VCR
20917-003
LP
VHF/UHF
ANTENNA
IN
CH3 CH4
TV OUT
S-Video cables
audio cables
video cable
3) Use an RF coaxial cable to connect the RF OUT
VCR 2
Jack on VCR 2 to the TV's ANTENNA IN Jack.
OUT IN
VIDEO
ANTENNA
(MONO)
L
S VIDEO
CABLE BOX
AUDIO
R
CH3
OUT IN
1) Use audio cables to connect the
AUDIO OUT Jacks on VCR 1 to the
AUDIO IN Jacks on VCR 2.
2) Use a video cable to connect the
VIDEO OUT Jack on VCR 1 to the
VIDEO IN Jack on VCR 2. (Or, to
improve picture quality, you may connect
an S-Video cable to the S-VIDEO OUT
jack on VCR 1 and to the S-VIDEO IN
jack on VCR 2 instead.
• Unauthorized recording of copyright-
ed television programs, video tapes,
or other materials may infringe on
the rights of copyright owners and
violate copyright laws.
• If a program has copyright protec-
tion, it may not record clearly.
• Audio and video cables are not
included.
• To stop copying tapes, press the
STOP/EJECT button on VCR 2, then
press the STOP/EJECT button on
VCR 1.
• If you connect the audio and video
or S-video cables to the
AUDIO/VIDEO or AUDIO/S-VIDEO
IN jacks on the front of VCR 2, you
must select A/V IN FRONT at step
4.Then, select VIDEO or S-VIDEO at
FRONT A/V INPUT in the VCR Set
Up menu. If you connect the audio
and video or S-Video cables to the
AUDIO/VIDEO IN or AUDIO/S-
VIDEO IN jacks on the back of VCR
2, you must select A/V IN REAR at
step 4.Then select VIDEO or S-
VIDEO at REAR A/V INPUT in the
VCR Set Up menu.
LP 20917-003
VHF/UHF
IN
CH4
TV
OUT
Helpful Hints