Recording - Marantz MV5100 User Manual

MV5100 27-84 7/21/00 10:59 AM

30 Recording

Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever chan-
nel the CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape with its record tab intact (details are on page 5) in
the VCR.The power will come on.
3
Press the VCR button.
4
If the VCR light appears on the display panel of the VCR, go to step
5. If the VCR light does not appear, press the VCR/TV but-
ton once.
5
Press the ALT/SPEED button until the desired tape speed
appears on the screen. The VCR will only record in SP or SLP.
Details about tape speed are on pages 41 and 77.
6
Use the CH(annel) 8/9 button or the Number buttons to
select the channel to be recorded.
7
Press the REC(ord)/OTR button to start recording. The \
light will appear on the VCR display panel. If no tape is in the VCR,
NO CASSETTE will appear on the screen briefly.
8
To pause the recording (for example, during commer-
cials), press the STILL/SLOW
appear on the display panel.
To resume recording, press the STILL/SLOW
again. The \ light will appear on the display panel.
9
Press the STOP 9 button to stop recording.The \ light will
disappear from the display panel.
10
Press the STOP/ EJECT button on the front panel to
remove the tape. The tape number will be assigned and appears
on the screen. Write the tape number on a label and affix the
label to the tape for the Tape Manager. Details are on page 64-73.
Page 30
button. The \ M M light will
button
1 Turn on the TV.
2 Insert a tape.
SAT/
CBL/DBS TV VCR
4
VCR/TV POWER SMARTPICTURE
QUICK PROGRAMMING
+ +
1 2 3
–+ * ABC DEF
START STOP DATE
4 - 5 - 6
GHI JKL MNO
VPS/PDC DAILY WEEKLY
7 8 9
PQRS TUV WXYZ
5
SPEED DBS/SAT
ALT 0 CLEAR
STILL/SLOW
- +
.......... ..........
REW FF
8
PLAY
STOP
VOL CH
OK/STATUS
9
MENU
TIMER
TURBO AUDIO/ SKIP TAPE
TIMER MUTE SEARCH MANAGER
JOG/SHTL /OTR
REC
REV
Helpful Hints
• If the REC(ord)/OTR button is
pressed while a tape without a
record tab is in the VCR, PROTECT-
ED CASSETTE CANNOT RECORD
will appear on the screen briefly.The
VCR will eject the tape.
• The VCR records in a preset volume.
• If the end of the tape is reached
while recording, the VCR will stop
recording, rewind the tape, then stop.
Details are on page 76.
• While "- - - -" is blinking on the VCR
display panel after insert a tape, the
tape will run for a few seconds to
search for the tape number. Details
are on page 64.
• DSPC may appear briefly on the dis-
play panel when you start a record-
ing. Details are on page 60.
3
6
7
FWD