Samsung SyncMaster 570s Service Manual page 10

3 Disassembly and Reassembly
4. Remove the Stand Rear from the Stand
assembly.
5. Remove the Stand Front from the Stand
assembly.
6. Remove the Neck Rear from the Stand
assembly.
7. Remove the 4 Rubbers on the four corner of
the Stand Bottom and the 4 screws on the four
corner of the Stand Bottom.
8. Remove the 5 stopper hings from the Bracket
Bottom.
9. Remove the Stand Base from the Stand
Assembly.
3-2 Replacement Order of Lamp Assemblies (CN15LSB/CN15LOB : Toshiba Panel)
3-2
3-1-6 Wire frame stand Disassembly (option)
1. Carefully pull the cover hinge.
2. Remove the cover vesa from the Stand
assembly.
3. Remove 4 screws on the assembly Bracket
assembly.
1. Removing the lamp wire holding tape from
the metal chassis on the bottom side.
1-1 Taking out the lamp wire from the lamp wire
holder.
2. Unscrewing the screw.
Unscrewing force : 0.8 ~1 Kg - f.cm
3. Pulling out the lamp assembly with stable
power and direction slowly.
Be careful, do not twist the lamp reflector
when pulling the lamp.
SyncMaster 570sTFT / 580sTFT