Advertisement
Quick Links
Technical Support
Visit the Support section of the Tandberg Data web site
(http://www.tandbergdata.com) for the following:
• K nowledge base articles
• T roubleshooting information
• P roduct documentation
• S oftware updates
• P roduct warranty and registration
• E mail and phone technical support
©2012 Tandberg Data. All rights reserved. BizNAS is a trademark of Tandberg
Data. All other trademarks are the property of their respective owners.
Installing Disks
Follow these instructions to install one or more disks
into your NAS.
1.
Press the blue tab to release the disk tray handle.
2.
Pull the tray out by the handle.
3.
Slide the disk into the disk tray.
4.
Flip the tray over and use the four supplied screws to secure the
disk into the tray.
5.
Insert the disk tray into the empty slot.
6.
Close the handle to secure the disk tray into the slot.
#1020508A#
BizNAS™ R400 series
Registration Code
www.tandbergdata.com
Advertisement
Related Manuals for Tandberg Data BizNAS R400 series
Summary of Contents for Tandberg Data BizNAS R400 series
- Page 1 Insert the disk tray into the empty slot. Close the handle to secure the disk tray into the slot. Registration Code ©2012 Tandberg Data. All rights reserved. BizNAS is a trademark of Tandberg #1020508A# Data. All other trademarks are the property of their respective owners.
- Page 2 • A ccess to the Internet from a computer connected to the LAN. electrical outlet. Note: The BizNAS R400 series retrieves its IP address and other network addressing automatically via DHCP. After you have accessed the Tandberg Data BizNAS Information Center, you can change to static network addressing, if desired.
Need help?
Do you have a question about the BizNAS R400 series and is the answer not in the manual?
Questions and answers