Startup - Samsung GALAXY Young Quick Start Manual

TRUE
tfm
OPERATION

STARTUP

A. The compressor is ready to operate. Plug in the cooler.
B. Temperature controls are factory-set to give freezers an
approxiate temperature of -10°F. Allow unit to function several
hours, completely cooling cabinet before changing the control
setting.
Temperature Control Location and Settings.
• Mechanical temperature control is located on rear of unit or
behind access grill.
See website for adjustments, sequence of operation, and more
information.
C. Excessive tampering with the control could lead to service
difficulties. Should it ever become necessary to replace
temperature control, be sure it is ordered from your TRUE
dealer or recommended service agent.
7
D. Good air flow in your TRUE unit is critical. Be careful to
load product so that it neither presses against the back wall,
nor comes within four inches of the evaporator housing.
Refrigerated air off the coil must circulate down the back wall.
NOTE: If the unit is disconnected or shut off, wait five minutes
before starting again.
RECOMMENDATION - Before loading product we recommend
you run your TRUE unit empty for two to three days. This allows
you to be sure electrical wiring and installation are correct and no
shipping damage has occurred. Remember, our factory warranty does
not cover product loss!
. .
www truemfg com