Advertisement
Unplug the wine cooler and remove the bottles.
•
Wash the inside with a warm water and baking soda solution. The solution
•
should be about 2 tablespoons of baking soda to one litre of water.
The outside of the wine cooler should be cleaned with a mild detergent
•
and warm water.
Draw out the water box at the bottom, and wash.
•
Remove all bottles.
•
Securely tape down all loose items inside your wine cooler.
•
Turn the levelling legs up to the base to avoid damage.
•
Tape the door.
•
Be sure the wine refrigerator stays in the upright position during
•
transportation.
Wine cooler isn't operating.
Wine cooler is not cold enough.
The light does not work.
The cooler is vibrating during use.
The wine cooler seems to make too much noise.
The door will not close properly.
LED does not display.
LED display error.
Buttons are not functional.
Door does not close tightly
Check that the plug is plugged in securely and that the
circuit breaker hasn't been tripped in your meter box.
Check the temperature control setting.
External environment may require a higher setting.
The door is being opened too often.
The door is not closed completely.
The door seal does not seal properly.
The wine cooler does not have the correct clearance
around it.
Contact the Kogan customer support team.
Check to assure that the wine cooler is level.
The wine cooler is not level.
Check the fan.
The wine cooler is not level.
The doors were reversed and not properly installed.
The seal is weak.
The shelves are out of position.
Main control board does not work.
There is some problem with the plug.
Contact the Kogan customer support team.
Weak quality of display.
Contact the Kogan customer support team.
Temperature controller panel is damaged.
Check the door seal if it is in proper position.
Check if the wine bottles are placed in their correct
positions.
Weak magnetic door seal.
4
Advertisement
