Specifications; Removal And Installation - Sanyo HT-F450 Service Manual

. . .
)
SPECIFICATIONS
,.. . . -.
Output power:
Oenter amplifien 15 Watts (at 4 ohms, 10
0/0
distortion)
Surround Amplifiec 15 Watts x 2 (at 4 ohms, 107. distortion)
Inputs
AV1 lN/AV2 lN/AV3 IN 'AUDIO" .........300 mV/47k ohms
AVI INIAV2 lN/AV3 INUVIDEO" ........... 1 Vp-p / 75 ohms
LINE IN "AUDIO" ................................. 300 mV/ 47k ohms
outputs
AV2 OUT "AUDIO" .............................. 300 mV 147k ohms
PROCESSOR OUT "AUDIO" ..............1 V/ lk ohm
AV2 OUT MONITOR OUT "VIDEO" .... 1 Vp-p / 75 ohms
CENTERBURROUND SPEAKERS ...4 ohms
Power requirements ...................... AC 230- 240V, 50 Hz
Power consumption ...................... 60 Watts
Dimensions (W x H x D) ................270 x 80 x 330mm
Weight ........................................... 3.8 kg
Specifications subject to change without notice.
.
.. ,,.. ;"., ,.' - ., ..
. .. . ..- ..-.'- -".-:-"
.. .
Speaker systems
Center speaker (SX-CE450)
Unit Used
Full range ................................. 10 cm cone type
Maximum music power
handling capacity ........................... 30 Watts (peak)
Nominal impedance ....................... 4 ohms
Dimensions (W x H x D) ................. 270x 130x 145mm
Weight ............................................ 1 kg
Surround speakers (SX-SR450)
Unit Used
Full range ................................. 10 cm cone type
handling capacity ........................... 30 Watts (peak)
Nominal impedance .......................40hms
Dimensions (W x H x D) .................180 x 130 x 130mm
Weight (per speaker) ..................... 0.7 kg (per speaker)
..
"Dolb~, the double-D symbol a and "PRO LOGIC" are trade-
mark of Dolby Laboratories Licensing Corporation. Dolby Noise
Reduction system is manufactured under license from Dolby
. ._
Laboratories Licensing Corpora~ion.
REMOVAL AND INSTALLATION
Disconnect the power cord's plug from the electrical outlet.
All wiring should be returned to the original position after work is completed.
First ha~e ready many the new FIXERS (614 129 4971) for replacement.
Arrange the lead wires so that they are not near the heat sink.
WIRING "LAYOUT ---
FIXER
./—
u u u
I 1
-1-
..'. :
,.
,'