Advertisement

GB
MOTOCULTIVATOR - MOTORMOWER
USE and MAINTENANCE MANUAL
READ THIS MANUAL CAREFULLY
All right reserved
This manual cannot be either reproduced or released without the
manufacturer's prior written consent.
PRINTED IN ITALY
1 - FOREWORD
This symbol is used to highlight an important safety information. If
this information is ignored, people are in danger either of possible
injures – even serious ones – or death.
IMPORTANT
This term highlights special precautions to be taken in order not to
damage the machine.
The machine serial number is printed on the drive box.
Always mention the machine serial number when calling our technical service or when ordering spare parts.
The CE mark is on the right side of the gear-box housing.
MTC 601
2 – IDENTIFICATION AND MARKING
IMPORTANT NOTE
1. FOREWORD
2. IDENTIFICATION AND MARKING
3. CONDITIONS AND USING LIMITS
4. WARRANTY
5. MACHINE STARTING
6. WARNING AND CONTROL SIGNS
7. SAFETY WARNINGS
8. ENGINE STARTING
9. CONTROL DEVICES USE
10. WORK STARTING
11. RULES FOR A GOOD WORKING
12. MAINTENANCE AND TROUBLES
13. TECHNICAL DATA
14. ADVICES AND DECLARATION
Use and maintenance instructions of the engine are
mentioned in the relevant manual, whose copy is always
supplied with every machine.
MARKING
-
-
0
12/07
INDEX
ENGINE
Marking example.
Pag. 0
Pag. 0
Pag. 1
Pag. 1
Pag. 2
Pag. 2
Pag. 3-4
Pag. 5
Pag. 6
Pag. 7
Pag. 7
Pag. 8
Pag. 9
Pag. 10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MTC 601 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Meccanica Benassi MTC 601

  • Page 1 12/07 MOTOCULTIVATOR - MOTORMOWER USE and MAINTENANCE MANUAL MTC 601 INDEX 1. FOREWORD Pag. 0 2. IDENTIFICATION AND MARKING Pag. 0 3. CONDITIONS AND USING LIMITS Pag. 1 4. WARRANTY Pag. 1 READ THIS MANUAL CAREFULLY 5. MACHINE STARTING Pag. 2 6.
  • Page 2: Warranty

    3-CONDITIONS AND USE 4-WARRANTY This manual gives you general information on how this If in doubt on causes and possible solutions for a certain machine should be used and maintained. For any technical trouble, please, call our authorized dealer. problem, please, call Your confidential dealer. This should be absolutely done during the warranty period, since any repair made by non-authorized workshops makes this warranty null and void.
  • Page 3: Machine Starting

    5 – MACHINE STARTING READ CAREFULLY THE WHOLE MANUAL BEFORE STARTING THE FLAIL MOWER. NOTES: The manufacturer aims at ever improving both design and quality of his products. As a consequence, even though this manual includes latest and most up-dated information available when printed, there might be small differences between your machine and the information of this manual.
  • Page 4: Safety Warnings

    7- SAFETY WARNINGS 1) This machine has been designed and manufactured for being used by one operator only, and is driven by means of the appropriate handlebars. Any other use is not permitted.! ) Before the machine is operating, read the Use and Maintenance manual thoroughly, so that you are fully aware of all the operating controls and safety aspects of the machine.
  • Page 5: Use Of Machine

    The machine can be used and repaired only by people that have red this book and have been informed about the possible dangers. Any arbitrary modification made on the machine exonerates MECCANICA BENASSI SPA from any responsibility for the damages that can be caused.
  • Page 6: Engine Starting

    8 – ENGINE STARTING Before using the machine refer always to the ENGINE – USE AND MAINTENANCE – BOOKLET!  The hole on the tank’s plug is open. Before starting the machine always check:  The oil level in the air filter if this is in oil ...
  • Page 7: Description Of The Controls

    9 – DESCRIPTION OF THE CONTROLS Referring to the picture on right side: 1. Clutch lever: placed on the left of the handlebar, disengaged the engine from the transmission; to be used when you engage the speeds or the p.t.o. or when you switch the engine off.
  • Page 8 10 – WORK STARTING The machine is normally delivered packed into a carton with or without accessories that may be packed into other cartons due to their dimensions. To prepare the machine do in this way: Machine used as motormower ...
  • Page 9 12 - MAINTENANCE LUBRICANTS To ensure the efficiency of the machine is necessary Bear in mind it is better to change oil at least once a a good maintenance and a perfect lubrication. The year. machine is normally delivered packed into a carton without engine oil, as clearly indicated on the yellow CUTTING BAR ticket applied on the engine itself.
  • Page 10: Technical Data

    13 – TECHNICAL DATA ENGINE Honda GC160 3.7 kW (5.0 HP) a 3600 r.p.m. CLUTCH Conical type in oil bath GEAR BOX 2 speeds: one forward and one reverse with wheels disengagement 930 r.p.m., in version walking tractor , with left rotation; 1090 r.p.m. ,in P.T.O.
  • Page 11 CE – DECLARATION OF CONFORMITY In compliance with CEE 89/392 regulations and subsequent changes - CERTIFICATE OF ORIGIN - MECCANICA BENASSI S.p.A , I-44040 DOSSO (FE) via Statale, 325 DECLARES, under is own responsibility, that the item called MOTOCULTIVATOR Model: From serie - no.:...
  • Page 12 MTC 601 WALKING TRACTOR / MOTORMOWER NOTES:_____________________________________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ ECCANICA ENASSI - 11 -...
  • Page 13 Descriptions, figures and technical features mentioned herein are non-binding for the Manufacturer. These are mentioned as mere information. The Manufacturer reserves the right to make any change at any time without being bound to update this publication. Copyright of MECCANICA BENASSI S.P.A.”...

Table of Contents