Specification - LG 22LS2100 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This spec sheet is applied to the 22" LED Monitor TV used
LD93Q chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
2) Relative Humidity: 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
4. General Specification
4.1. RGB-PC
No. Item
1 Supported Sync. Type
2 Operating Frequency
3 Operating Frequency
4 Input Voltage
5 Inrush Current
Operating Condition
On mode
Power S/W On
6
Sleep mode
Power S/W Off Off mode
7 MTBF
8 Using Altitude
9 Operating Environment
10 Storage Environment
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

Specification
Separate Sync.(RGB), SOG
Horizontal
Analog
Vertical
Max
Analog
Recommend
Voltage :100 – 240 Vac, 50 or 60 Hz
Cold Start : 50 A, Hot : 120 A
Sync (H/V) Video
On/On Active
On/On Active
Off/On
Off
On/Off
- Off
30,000 HRS with 90 % Confidence level
5,000 m (for Reliability) 3,000m(for FOS)
Temp : 10 °C ~ 35 °C
Humidity : 20 % ~ 80 %
Temp : -10 °C ~ 60 °C non condensing
Humidity : 5 % ~ 90 % non condensing
- 6 -
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
30 ~ 69 kHz
56 ~ 61 Hz
1920×1080 @ 60Hz
1920×1080 @ 60Hz
LED Wattage
48(Max)
Off(PTN,PMN)
27(Typ.)
Blanking 1W
Red (PTN_PMN) 0.5W
Remarks
RGB
Just operate power key and remote
controller power button.
Lamp Life : 30,000 Hours(min)
LGE Internal Use Only