Advertisement
Quick Links
G-HUB Wireless Sensors &
Ethernet Gateway User's Guide
G-HUB Ethernet Gateway Quick Start
Create a Monnit user account with assigned wireless gateways and sensors.
Attach the antenna to the antenna connector on the back panel of the Ethernet gateway
(make sure the connection is snug, but do not overtighten).
Plug an Ethernet cable with internet connectivity into the gateway
Plug the power supply into a power outlet then connect to the gateway.
Once all three lights turn green, your network is ready to bring sensors online.
www.gdcworld.com
Advertisement
Summary of Contents for GDC G-HUB
- Page 1 G-HUB Wireless Sensors & Ethernet Gateway User’s Guide G-HUB Ethernet Gateway Quick Start Create a Monnit user account with assigned wireless gateways and sensors. Attach the antenna to the antenna connector on the back panel of the Ethernet gateway (make sure the connection is snug, but do not overtighten).
- Page 2 Back Panel ID: ###### Code: XXXXXX 6a. Add the information from your first G-HUB wireless sensor then click the “Assign Sensor” button. Power Plug Control Button Ethernet Port RP SMA Antenna Connector...
- Page 3 IP address as well as a gateway mask and default DNS through the online interface. For more information on configuring the G-HUB Ethernet Gateway please view the support documentation at http://www.G-HUB.com/pdf/Ethernet_Gateway_Configuration.pdf.
- Page 4 To the left side of each sensor row is an indicator to help you understand the current 3. Configuring Sensor Settings status of the sensor. To edit a sensors operation settings, click on the sensor overview row to display the details Sensor is checking in and within user defined safe parameters.
- Page 5 4. Sensor and/or Gateway Notification(s). • Advanced Notifications - Allows the user to set notifications based on advanced rules, Notifications for a single sensor can be created, deleted or edited by clicking the such as comparing past data points with the current one to determine if a notification “Notifications”...
- Page 6 Certain wireless sensors can be calibrated for more accurate readings (ex. temperature If you have a G-HUB Control or Notifier A/V device on your network, you will also see sensors). If calibration is possible for a sensor, the “Calibrate” tab will be visible in the detail view.
- Page 7 Poll on the gateway’s assigned port to retrieve gateway and sensor data. The name can be edited to whatever you prefer. The gateway type should NOT be edited, unless you are directed to do so by a G-HUB Support Representative.
- Page 8 MODBUS TCP Interface Data 1 Sensor Data Field 1 40109 Use MODBUS TCP software to pull in gateway and sensor data. G-HUB provides a regis- Data 2 Sensor Data Field 2 40110 ter map. Check the box to make the interface Active and Save.
- Page 9 6. Setting up the Ethernet gateway for use with iG-HUB Express Ethernet Gateway MIB tree with a short description of each field: iG-HUB Express (PC Software) Setup EGW Data Description Visit http://www.G-HUB.com/support/downloads/ to download and install the iG-HUB *GW Section Gateway Section Express software. *GW Serial...
- Page 10 • Under “Default Server Configuration” enter the IP address that you noted from the iG-HUB Address, power up your gateway and make sure the gateway is added into G-HUB Express software into the primary and secondary server [URL/IP] boxes, and use 3000 as Express.
-
Page 11: Error Reporting, Troubleshooting And Support
AGES. THE PRICE STATED FOR THE PRODUCTS IS A CONSIDERATION IN LIMITING to the warranty set forth in this Section, G-HUB shall provide a bug fix or software patch G-HUB’S LIABILITY. NO ACTION, REGARDLESS OF FORM, ARISING OUT OF THIS... - Page 12 • Consult the dealer or an experienced radio/TV technician for help. this device must accept any interference, including interference that may cause undesired operation of the device. Warning: Changes or modifications not expressly approved by G-HUB could void the user’s authority to operate the equipment. French RF Exposure Conformément à...
-
Page 13: Additional Information And Support
Additional Information and Support For additional information or more detailed instructions on how to use your G-HUB Wireless Sensors or the iG-HUB Online System, please visit us on the web at http://www.G-HUB.com/support/. Global Design Corporation Inc 67 East Park Place Suite 750, Morristown NJ 07960, United States...