Specification; Electrical Specification - LG 42LH35FD Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LCD TV used LJ91A
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature : 25±5ºC (77±9ºF), CST : 40±5ºC
2) Relative Humidity : 65±10%
3) Power Voltage : Standard input voltage(100~240V@50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to
the adjustment.

4. Electrical specification

4.1 General Specification
No Item
Receiving System
1.
Available Channel
2.
3. Input Voltage
4. Market
Screen Size
5.
6. Aspect Ratio
7. Tuning System
Module
8.
Operating Environment
9.
Storage Environment
10.
Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes

SPECIFICATION

3. Test method
Specification
1) SBTVD / NTSC / PAL-M / PAL-N
1) VHF : 02~13
2) UHF : 14~69
3) DTV : 02-69
4) CATV : 01~135
1) AC 100 ~ 240V 50/60Hz
Central and South AMERICA
32 inch Wide (1920 X 1080)
37 inch Wide (1920 X 1080)
42 inch Wide (1920 X 1080)
16:9
FS
LC320WUN-SAB2 (VITIAZ 3)
LC370WUE-SBB2 (VITIAZ 4)
LC420WUE-SBC1 (VITIAZ 4)
1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
1) Temp : -20 ~ 60 deg
2) Humidity : ~ 85 %
- 6 -
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: UL, CSA, IEC specification, CE
- EMC: FCC, ICES, IEC specification, CE
Remark
Mark : 110V, 60Hz
32LH35FD-SF
37LH35FD-SF
42LH35FD-SF
32LH35FD-SF
37LH35FD-SF
42LH35FD-SF
LGE Internal Use Only