Brother DCP-L2500D Quick Setup Manual page 2

6A
Configuration using the CD‑ROM (Windows
NOTE:
If the Brother screen does not appear
automatically, go to Computer (My Computer).
(For Windows
icon on the taskbar, and then go to Computer.)
Double‑click the CD‑ROM icon, and then
double‑click start.exe.
Connection Type
6B
Configuration without using the CD‑ROM (Windows
Download the full driver and software package from the Brother Solutions Center.
(For Windows ) solutions.brother.com/windows
®
(For Macintosh) solutions.brother.com/mac
After you download the driver and software package, follow the on‑screen instructions until the Connection Type screen appears. Refer to
(Windows ® ).
6C
One‑push wireless setup for mobile devices (Wireless models only)
If your wireless LAN access point/router supports automatic wireless (one‑push) setup (WPS/AOSS™), you can set up your machine without using a computer.
Press the WPS or AOSS™ button on your
wireless LAN access point/router.
Print and scan using your mobile device
Download "Brother iPrint&Scan" to start using your machine with mobile devices.
solutions.brother.com/ips
® 8: click the (File Explorer)
Wireless Network Connection
[Recommended]
Select this option if you have a USB cable to
use temporarily for wireless setup.
Select this option if you do not have a USB cable.
Press the WiFi button on your machine.
)
®
For USB Connection
For Wired Network Connection
Connect a network cable first.
For Wireless Network Connection
We recommend preparing a USB cable
to use temporarily during the wireless
setup.
without CD‑ROM drive or Macintosh)
®
Wireless setup is now complete.
NOTE:
Before you can use your machine with your mobile device, download
"Brother iPrint&Scan."
Follow the on‑screen instructions
to continue installation until either
the Connect the machine or the
Connection Type screen appears.
„ Connect the machine: Follow
the on‑screen instructions to
continue installation.
„ Connection Type:
Follow the on‑screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
Follow the on‑screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
6A Configuration using the CD-ROM
Finish
Finish
Finish