Ultra Steel AP00973S Instruction Manual

Ultra Steel AP00973S Instruction Manual

Cordless power tool combo kit
Hide thumbs Also See for AP00973S:

Advertisement

THE RBRC TM SEAL
The RBRCTM Seal (Rechargeable Battery Recycling Corporation) on the
nickle-cadmium battery (or battery pack) indicates that the cost of
recycling the battery or battery pack have already been paid by Ultra
Steel. In some areas, it is illegal to place spent nickle-cadmium batteries in
the trash or municipal solid waste stream and the RBRC program provides an environ-
mentally conscious alternative.RBRC in cooperation with Ultra Steel and other battery
users, has established programs in the United States and Canada to facilitate the
collection of spent nickle-cadmium batteries. Help protect our environment and
conserve natural resources by contacting your local recycling center for information on
where to drop o_ the spent battery, or call 1-877-2-RECYCLE.
FULL ONE YEA HOME USE WARRANTY
Ultra Steel warrants this product for one year against any defects in material or
workmanship. The defective product will be replaced or repaired at no charge in
either of two ways:
1) Return the product to the store in which it was purchased - this will result in an
exchange only.
Returns should be made within the time frame of the retailer's policy for exchanges
(usually 30 to 90 days after the sale). Proof of purchase is required. Please check with
the store from which your purchase was made to determine policy regarding returns
that are beyond the time limit speci ed for exchanges.
2) Send the product to Ultra Steel for repair or replacement (whichever Ultra Steel
determines is the best option) and include your proof of purchase.
This warranty does not apply to accessories. This warranty gives you speci c
legal rights and you may have other legal rights which vary from state to state
or province to province. For questions, call Ultra Steel at 1-800-840-7856.
This product is not intended for commercial use.
SERVICE INFORMATION:
For technical advice, repair, or genuine replacement parts,
call 1-800-840-7856 or visit www.UltraSteeltools.com
FREE WARNING LABEL REPLACEMENT:
If your warning labels become illegible or are missing, call 1-800-840-7856 for free
replacement.
Ultra Steel is a registered trademark of and distributed by Test Rite Products
Corporation, 1900 S. Burgundy Place, Ontario, CA. 91761, U.S.A.,
Made in China
15
ULTRA STEEL
4
PIECE
1 8
VOLT
Cordless Power Tool Combo Kit

INSTRUCTION MANUAL

AP00973S
CAUTION: Before using this product, read this manual and follow all Safety Rules
and Operational Instructions.
Go to www.ultrasteeltools.com to register your product.
Please read before returning this product to store for any reason:
If you have questions or experience a problem with your Ultra Steel purchase,
go to http://www.ultrasteeltools.com for instant answers 24 hours a day.
If you can't _nd the answer or don't have internet access, call 1-800-840-
7856 from 8 a.m. to 5 p.m. Eastern time Monday through Friday

Advertisement

Table of Contents
loading

Summary of Contents for Ultra Steel AP00973S

  • Page 1: Instruction Manual

    1-877-2-RECYCLE. FULL ONE YEA HOME USE WARRANTY INSTRUCTION MANUAL Ultra Steel warrants this product for one year against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways:...
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 15. STAY ALERT. Watch what you are doing & use common sense. Don’t operate any tool when you are tired. 16. CHECK FOR DAMAGED PARTS. Before using a tool, any part that is damaged WARNING: When using electric tools, machines or equipment, basic safety should be carefully checked to determine that it will operate properly and perform precautions should always be followed to reduce the risk of fure, electric shock, and personal injury.
  • Page 3: Specifications

    SPECIFICATIONS Cordless Sander Model No.: AP00963G Voltage: 18 volts DC Cordless Drill No Load Speed 4400 RPM Trigger Model No.: AP00965G Switch Voltage: 18 volts DC 3-1/2 In. Sanding Pad No Load Speed 0-350/0-1100 RPM Variable Speed Trigger Conforms to UL STD No. 60745-1, UL With Electric Brake Sanding Base STD No.
  • Page 4: Operating Notes For Battery Pack/Drill

    WARNING: Hold power tools by insulated gripping surfaces when performing trash receptacles. an operation where the ctting tool may contact hidden wiring or 11. For use only with Ultra Steel AP00965G -B Ni-cd battery. its own cord. OPERATING NOTES FOR CIRCULAR SAW...
  • Page 5: Operation Notes For Detail Sander/Light

    1. Always grasp the saw with both hands on the handles and push the saw through CAUTION: Do not put hands directly in front of, behind, or below the saw the material. blade when cutting. 2. Be sure there are no nails or any other foreign objects in, on the work piece, or in the path of the blade.
  • Page 6 • Keep the tool clean using a soft damp (not wet) cloth. Do not use solvents on the PARTS LIST FOR CORDLESS DRELL plastic parts. • Lubrication is not necessary. After long use, have an authorized service centre main Item English Name Unit Item...
  • Page 7: Parts List For Circular Saw

    PARTS LIST FOR CIRCULAR SAW Item English Name Unit Item English Name Unit Screw M6x16 Gear box(rear) Upper platen Screw M4x12 Saw blade Small Gear Lower platen Motor Screw M4x12 Right housing Adjustable guade Screw ST3.9x16 Spring Motor cover Fixed guade Screw ST3.9x16 Screw M4x12 Wrench...
  • Page 8: Parts List For Cordless Detail Sander

    PARTS LIST FOR CORDLESS DETAIL SANDER PARTS LIST FOR CORDLESS LIGHT Item English Name Unit Item English Name Unit Item English Name Unit Item English Name Unit Loge label Driving gear Housing (support ) Right middle cover Screw Motor Left head cover Battery clip assembly Housing cover Housing support...

Table of Contents