Sony XBR-70X850B Operating Instructions Manual page 20

The length of the M4 machine screw
differs depending on the rope or chain
diameter. Please see below illustration.
Consider the following measures when
securing your TV to a Stand (not supplied).
1 Secure the Stand for the TV.
Make sure the Stand can adequately
support the weight of the TV. Use two
angle braces (not supplied) to secure
the stand. For each angle brace use the
appropriate hardware to:
• Attach one side of the angle brace to
the wall stud.
• Attach the other side to the Stand.
2
_ Angle brace
(not supplied)
Stand
Secure the TV to the Stand.
Use the optional hardware listed as
follows (not supplied):
• M4 machine screw (screwed into the
TV's rear cover)
• A screw or similar (attach it to the
Stand)
• Rope or chain (strong enough to
support the weight of the TV). Make
sure that there is no excess slack in
the rope or chain.
Screw hole on
the rear cover
M4
machine
,...._ screw(not
supplied)
Rope or chain
(not supplied)
Screw
(not supplied)
3
8-12 mm
M4
Rope or chain
TV's rear cover
Anchor the TV to the wall by using bolts,
wall anchor and chain (or rope).
M6 eye bolts (not supplied)
Rope or
chain (not
supplied)
Wall-anchor
(not
supplied)
Please see below illustration for M6 eye
bolt length.
8-12 mm
M6 eye bolt
rear cover
20 us