Advertisement
i. The warnings, precautions, and
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations
that may occur. It must be under-
stood by the operator that common
sense and caution are factors which
cannot be built into this product, but
must be supplied by the operator.
2.
Service
Have your Digital Caliper serviced by a
qualified repair person. This will ensure
the integrity of this tool is maintained.
!
SAVE THESE
INSTRUCTIONS.
SPECIFICATIONS
Display Scales
Display Digits
Calipers Range
Measuring Speed
Measuring
Positions
Power Supply
Shut-Off
UNPACKING
When unpacking, check to make
sure that the item is intact and undam-
aged. If any parts are missing or broken,
please call Harbor Freight Tools at the
number shown on the cover of this manual
as soon as possible.
For technical questions, please call 1-800-444-3353.
SKU 98851
Decimals, Fractions, &
Millimeters
LCD (Liquid Crystal Display)
0" - 6", Or 0mm - 150mm
1.5m/sec OR 60in/sec
4-Way Measuring:
Outside
Inside
Depth
Step
One 1.5V DC LR44 Button
Cell Battery (Included)
4 Minute (Automatic)
List of contents
Part(s)
6" Digital Calliper
1
Plastic Storage Case
1
OPERATING INSTRUCTIONS
!
Read the ENTIRE
IMPORTANT SAFETY
INFORMATION section at the
beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
DO NOT bump, or shock the Digital
Caliper when applying it to the workpiece.
Rough treatment may damage the highly
sensitive mechanism.
Measuring the Outside of an
1.
Push the "ON" Button. To change the
setting from inches to fractions, or to
millimeters, press the "ON/Inch/Frac-
tion/MM" Button. Each time the But-
ton is pressed, the mode will change.
On/Inch/MM/Fraction
Inside
Measurement
Off
2.
Slide apart the Jaws of the Calliper.
See Figure 1.
Description
Object
Figure 1
LCD readout
Battery
Zero Button
Compartment
Outside Measurement
Page 3
Q'ty
1
1
Advertisement
