Brookstone 796246 User Manual page 25

calibratinG (troubleshootinG)
i
mportant: the Virtual Keyboard comes ready to use . however, if you find the keys
are not reacting as expected, follow the steps below to calibrate your keyboard .
1 . press the fn button and tap the c key twice . the screen will go in to calibration
mode . alternatively you can hold the on/off button down for 10 seconds after
device is powered on to access calibration mode .
2 . the screen will display 2 flashing icons . press the function keys (f1 and f12) .
hold your fingers down on the keys . (the unit will show 2 icons flashing at the
top, until you hear a beep . )
3 . the screen will now show 2 icons flashing at the bottom of the unit . press
the bottom outside keys (fn and arrow right) . hold your fingers down on the
keys until you hear a beep .
4 . the screen will then go back to the home screen as calibration of the unit has
been completed .
5 . if the keys are still being incorrectly recognized, try calibrating again .
note: to exit calibration mode at any time, press the fn and c key again .
note: no calibration information will be saved until the entire calibration mode has
been completed .
25