Toyota 2002 4runner Manual page 173

"AUTO" button
For automatic operation of the air condi-
tioning, press the "AUTO" button. An indi-
cator light will illuminate to show that the
automatic operation mode has been se-
lected.
In the automatic operation mode, the air
conditioning selects the most suitable fan
speed, air flow, air intake and on–off of
the air conditioning according to the tem-
perature.
When you adjust the temperature selector
button to maximum cooling, a
COLD" message will appear on the display
and the air intake mode will be automati-
cally changed to RECIRCULATE.
You may use manual controls if you want
to select your own settings.
To turn off the automatic operation, press
the "OFF" button.
Fan speed selector
Turn the knob to adjust the fan speed.
In automatic operation, you do not have
to adjust the fan speed unless you desire
another fan speed mode.
'02 4Runner_U (L/O 0108)
Temperature selector
Turn the knob to adjust the temperatu-
re—to the right to warm, to the left to
cool.
"OFF" button
Push the button to turn off the air condi-
tioning system.
"MAX
2002 MY 4RUNNER_U (OM35787U)
Air flow selector, "MODE" button
Press the button to select the vents used
for air flow.
In automatic operation, you do not have
to select the air flow unless you desire
another air flow mode.
1. Panel—Air flows mainly from
instrument panel vents.
2. Bi–level—Air flows from both the floor
vents and the instrument panel vents.
3. Floor—Air flows mainly from the floor
vents.
It is recommended that you close the
lower vent. For details about this, see
"Instrument panel vents" in this section.
the
167