Iosafe 214 At A Glance - ioSafe 214 Quick Start Manual

ioSafe 214 at a Glance

No. Article Name
1)
Power Button
2) Copy Button
3) USB 2.0 Port
4)
LED Indicators
5) RESET Button
6)
Power Port
7) USB 3.0 Ports
8)
LAN Port
9) Fan
6
Location
The power button is used to turn the ioSafe 214 on or off.
To turn the 214 on, press and release the power button. The LEDS will start
flashing. The system is ready when you hear a beep.
Front Panel
To turn off the ioSafe 214, press the power button and hold it until you hear a
beep sound and the Power LED starts blinking.
The Copy button lights up when you connect a USB Device to the USB port on
the front panel. Pressing the button will copy the data from the connected USB
Front Panel
device to ioSafe 214's internal HDD.
USB ports for adding additional external hard drives, USB printers, or other USB
Front Panel
devices.
The LED indicators are used to display the status of the internal disk and the
Front Panel
system. For more information, see "LED Indication Table" on Page 30.
1. To restore IP, DNS, passwords for the admin account to default value.
Back Panel
2. To reinstall the ioSafe 214.
Connect the AC adapter to this port.
Back Panel
USB ports for adding additional external hard drives, USB printers, or other USB
Back Panel
devices.
The LAN port for connecting network (RJ-45) cable to the ioSafe 214.
Back Panel
To maximize cooling, please do not block the fan exhaust. If the fan is
Back Panel
malfunctioning, the system will beep.
Description