Finding Your Iosafe 214 With The Synology Assistant; For Windows - ioSafe 214 Quick Start Manual

Finding your ioSafe 214 with the Synology Assistant

This section will locate your ioSafe 214 on your network.
Before beginning the process below, make sure that the 214 is connected to your router/switch with the network
cable and that the power cord is plugged in and the 214 is powered on.
After you complete these steps, refer to the User's Guide on the installation disc for advanced settings and
management. For more information or online resources about your ioSafe 214, please visit
http://iosafe.com/support-2baynas.

For Windows

1 Insert the installation disc into your computer, and click
complete the setup process.
2 Synology Assistant will be installed and launched on your computer. It will search and find your ioSafe 214 within
LAN, and the status of your ioSafe should be
3 A web browser should open showing the 214 Login screen. Enter the default login and password.
admin
24
Synology Assistant. Follow the onscreen instructions to
DHCP Ready. Click on connect to access your ioSafe 214.
user name: admin
password: "empty"
4.2-3224 DS214 A5GA