Extech Instruments 365535 User Manual page 12

You can press [START] to scroll through all segments. The current segment will come first.
{008}
SEG
{2}
The header consisting of the date/time stamp will be shown. The number of laps in the segment will appear in the
upper left while the segment number is displayed in the middle left. If the segment shown is not your desired segment,
press [START] to reach the desired segment. The current segment will be accessed first, then it will cycle back to the
1st, then 2nd and so on.
When you have found the segment you want, you can press [RECALL] button consecutively to read the lap records
from the first to the last lap.
{1}
SEG SPLIT
{2}
LAP
RUN
As you continue to press [RECALL] during the display of the last lap, you can advance to the next segment by pressing
[START], The front page of the segment will be shown. Say the next segment is SEG 1.
{012}
SEG
{001}
How to delete individual memory segments:-
Search the desired segment first as described above. During the display of the segment front page, press [RESET]
for 2 seconds to activate Delete One function. DELETE ONE will be shown in blinking and beep sound will be
generated.
12
2001
2-19
A 10:15'30
0:01'00"55
0:00'12"86
0:01'00"55
2001
2-18
A 10:00'15
dELETE
OnE
365535-en-GB_V1.2 1/15