Sort The Laundry And Loading The Drum - Miele T 8007 WP SUPERTRONIC Operating Instructions Manual

Heat pump tumble dryer
Hide thumbs Also See for T 8007 WP SUPERTRONIC:
Table of Contents

Advertisement

Prepare the laundry
To ensure an even drying result sort the
washed laundry according to:
. .
. . . the drying level required,
. . . the type of fibre or weave,
. . . size,
. . . the moisture content after spinning.
,
Make sure that objects, e.g.
detergent dispensing balls, have
been removed from the laundry.
They could melt and cause damage
to the dryer or the laundry.
– Check seams and stitching to ensure
that padding and linings are intact.
– Fasten duvet covers, pillow cases
etc. to prevent small items from
being rolled up inside them.
– Fasten zips, hooks and eyes etc.
– Tie fabric belts and apron strings.
– Sew in or remove underwiring from
bras.

1. Sort the laundry and loading the drum

Load the tumble dryer
^ Press the a button to open the
door.
^ Load the laundry loosely into the
drum.
Do not overload the drum. See the
"Programme chart" for
recommended loads for each
programme.
Overloading can cause
unnecessary wear and tear to the
laundry, and give a disappointing
drying result.
^ Before closing the door make sure
the fluff filter is correctly positioned.
Check the laundry is right inside the
drum so that it cannot get trapped
or damaged when the door is shut.
^ Shut the door either with a gentle
swing, or lean against it and push it
shut.
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents