Cadillac Escalade Manual page 44

Vehicle Positioning
At times, the position of the vehicle on the map may
be inaccurate due to one or more of the following
reasons:
•
The road system has changed.
•
The vehicle is traveling on slippery road surfaces
such as sand, gravel, and/or snow.
•
The vehicle is being driven on winding roads.
•
The vehicle is being driven on a long straight road.
•
The vehicle is approaching a tall building or a
large vehicle.
•
The surface streets run parallel to a freeway.
•
The vehicle has just been transferred by a vehicle
carrier or a ferry.
•
The current position calibration is set incorrectly.
•
The vehicle is being driven at high speeds.
•
The vehicle is repeating a change of direction by
going forward and backward, or turning on a turn
table in a parking lot.
•
The vehicle is entering and/or exiting a parking lot
or garage with a roof.
2-34
•
The vehicle has a roof carrier, ski, or bike rack
installed on it.
•
The vehicle has tire chains on it.
•
The tires have been replaced.
•
The tire pressure is incorrect.
•
The tires are worn.
•
The battery is disconnected.
•
The vehicle is driven in heavy traffic where driving
is at low speeds and the vehicle is stopped and
started repeatedly.
Problems with Route Guidance
Inappropriate route guidance may occur under any of
the following conditions:
•
You have not turned onto the road indicated
by the system.
•
Route guidance is not available for the next turn.
•
The route is not changed during automatic rerouting.
•
Plural names of places are displayed.