Changing The Programmed Time Of The Timer; Displaying Or Hiding The Programmed Time Of The Timer; Changing The Timer Ring Tone; Ring Tones - SAGEMCOM SIXT4 User Manual

Changing the programmed time of the
timer
• Go to ACCESSORIES / TIMER.
• Press Valid..
• Select SET DURATION in the list. Press Valid..
• Enter the desired time.
• Press Valid.. OK is displayed on the screen.
• Press Return to go back to the previous menu.
Displaying or hiding the programmed
time of the timer
• Go to ACCESSORIES / TIMER.
• Select VIEW in the list. Press Valid..
• If you want to show the timer, press Yes, else
press No.
• Press Return.

Changing the timer ring tone

• Go to ACCESSORIES / TIMER.
• Select RING TONE in the list of options, press Valid..
• The list of ring tones appears, the handset plays the
ring tone.
• Select the ring tone. Press Volume.
• Press or to increase or decrease the volume.
• Press Valid.. OK is displayed on the screen.
• Press Return to go back to the previous menu.

RING TONES

C
HANGING THE RING TONES
This menu enables you to associate a unique ring tone to
incoming calls.
• Go to RING TONE / EXTERNAL CALL.
• Press Valid..
• Select the ring tone of your choice.
• then press Volume.
Adjust the ringer volume using
• Press Valid.. OK is displayed on the screen.
• Press Return to go back to the previous menu.
A
CTIVATING OR DEACTIVATING THE BEEPS
• Go to RING TONE / BEEPS.
• Press Valid..
• To change the beep status, press Edit.
The status is changed on the screen.
• Press Valid.. OK is displayed on the screen.
• Press Return to go back to the previous menu.
or .
23