Phone Use; Handset Location; Telephoning; Receiving A Call - SAGEMCOM SIXT4 User Manual

PHONE USE

H
ANDSET LOCATION
Lost your handset? Press the button
the base, behind the keypad. The handset will then ring.
T
ELEPHONING

Receiving a call

• When a call is received, the phone rings.
• The caller's phone number is displayed on the screen
if you have subscribed to the "Caller ID" service.
The caller's name may also be displayed if it is
included in your phone book.
Accepting a call in handset mode
• Pick up the phone handset. You do not need to
press the handset's button.
• Make sure to identify the handset direction by the
dot which identifies the earpiece end. The call time
counter is displayed on the screen.
• To end the call, hang up the handset or press the
handset button.
• A visual and audible signal confirms that the hand-
set is hung up correctly.
• If the handset is not on the base, you have to press
the handset button to take the call.
Accepting a call in speakerphone mode
• Press
out holding the handset). The
call time counter are displayed on the screen.
on the back of
• To end the call, press
Toggle between handset mode and speaker-
phone mode
• If you are in handset mode, press and hold the
key and then hang up the handset to toggle to
speakerphone mode. Press the
end the call.
• If you are in speakerphone mode:
- If the handset is hung up on the base, lift the pho-
ne handset to toggle to handset mode.
- If the handset is not hung up on the base, press
the dial tone button
de.
• To end the call, hang up the handset on the base or
press
Use the
earphone
volume. The handset earphone volume or
speakerphone volume can vary from 1
to 5.
to speak in speakerphone mode (with-
symbol and the
again.
key again to
to toggle to handset mo-
.
and keys to vary the
volume or speakerphone
15