Starting Setup - Hitachi LE55A6R9 Owner's Manual

Starting setup

The Setup Wizard appears the first time you turn on the TV, and assists you to specify
the Air/Cable setting, and program your channels automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection is made.
1
To turn on the TV, press POWER. (It may take approx. 10 seconds for a picture to appear on
screen.) The Initial Setup Wizard begins.
2
Select your "TV Mode" by pressing ▲ or ▼ to select "Home" or "Retail".
NOTE:
Home mode will remember customized user settings in TV.
Retail mode is intended for in-store display and resets user settings each time TV is turned
off.
3
Press ▶ to go to the next step.
4
Press ▲ or ▼ to select your menu language, then press ▶ to go to the next step.
5
Press ▲ or ▼ to select your time zone, then press ▶.
• In the rare event that you live within broadcast range of two stations in two different
time zones, the TV may recognize the wrong station for the auto clock set.
6
Press ▲ or ▼ to your desired time format, then press ▶.
7
Press ▲ or ▼ to select signal type that you using, then press ▶.
8
Auto Channel Scan will begin. After the scan is completed, a TV channel appears on the
screen.
• Depending on the reception condition, it may take up to 30 minutes to complete
scanning channels. Please allow the process to complete without interruption.
9
After completion of channel scan, Roku Ready Streaming Stick can be activated. Please
follow the steps on next pages for the Roku setup procedure.
NOTE:
• If you press EXIT during the "Auto Channel Scan" process, the Auto Channel Scan will stop
and the TV will change to the normal view.
• When you make a menu selection, your changes occur immediately. You do not have to press
EXIT to see your changes.
15