Table of Contents
Advertisement
PC in socket (D-Sub jack)
1. Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
2. Connect the audio cable from the PC to the PC SOUND sock-
ets of the set.
3. Press the TV/PC button to select PC.
4. Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
Note : If you have an Apple macintosh, connect the VGA desktop
block (not supplied) from the 3 row 15 pin to 2 row 15 pin with the
signal cable and connect the VGA desktop block to the Macintosh.
Displayable Monitor Specification
MODE
Resolution
640x480
640x480
VGA
640x480
640x480
800x600
800x600
SVGA
800x600
800x600
800x600
(MAC)
832x624
1024x768
1024x768
XGA
1024x768
1024x768
1280x768
WXGA
1280x768
(Synchronization input form : separate)
Note :
a. If the set is cold, there may be a small "flicker" when the set is
switched on. This is normal, there is nothing wrong with the set.
b. If possible, use the VESA 1,024x768@60Hz video mode to
obtain the best image quality for your LCD monitor. If used under
the other resolutions, some scaled or processed pictures may
appear on the screen. If used to PC vertical frequency 85Hz,
some noise can be seen when PIP is on. In this case, set the PC
vertical frequency to 60Hz. The set has been pre-adjusted to the
mode VESA 1,024x768@60Hz.
c. Some dot defects may appear on the screen, like Red, Green or
Blue spots. However, this will have no impact or effect on the
monitor performance.
d. Do not press the LCD screen with your finger for a long time as
this may produce some temporary distortion effects on the
screen.
e. When the PC screen appears on the set, a message may appear
on the screen, and the message will differ according to the
Window system version (Win98, 2000). If a message appears
click "Next" until the message finishes.
If the message "out of Range" appears on the screen, adjust
f.
the PC as in the 'Displayable Monitor Specification' section.
DPM (Display Power Management) mode
When the PC is in the power saving mode, automatically the mon-
itor goes into DPM mode to save the energy.
Note : Use the supplied signal cable with the set. Otherwise, DPM
mode may not work.
Connection of PC
Horizontal
Vertical
Frequency(KHz)
Frequency(Hz)
31.4KHz
60Hz
35KHz
67Hz
37.5KHz
75Hz
43.2KHz
85Hz
35.1KHz
56Hz
37.8KHz
60Hz
48KHz
72Hz
46.8KHz
75Hz
53.6KHz
85Hz
49.7KHz
75Hz
48.3KHz
60Hz
56.4KHz
70Hz
60KHz
75Hz
68.6KHz
85Hz
39.5KHz
50Hz
47.6KHz
60Hz
PERSONAL COMPUTER
27
Advertisement
Table of Contents
