Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Davey POOLSWEEPA Hybrid
Summary of Contents for Davey POOLSWEEPA Hybrid
- Page 1 Hybrid - Robotic Suction Pool Cleaner Operating Instructions 8151170...
-
Page 3: Table Of Contents
Contents ❙ The Hybrid Suction Cleaner ......2 Parts ..............2 Warnings ............3 Specifications ...........3 Water conditions ..........3 Pool Preparation ..........3 Setup ..............3 Cleaning Process ..........6 Removal from the Pool and Storage ....7 Troubleshooting ..........7... -
Page 4: The Hybrid Suction Cleaner
Hybrid - Robotic Suction Pool Cleaner Operating Instructions The Hybrid Suction Cleaner ❙ The Hybrid Cleaner is powered by the pool pump. For successful cleaning results, make sure that you connect the cleaner properly to the pool system. Follow the instructions in this booklet for easy, efficient, and safe operation. Parts ❙... -
Page 5: Warnings
Warnings ❙ ❙ • Do not enter the pool while the cleaner is working. • The manufacturer is not responsible for any damage to the external pump. CAUTION Specifications ❙ ❙ • Wight – 4.5 kg / 9.9lb • Hose length – 10 Hoses of 1.17m / 3.83ft • Required water flow –... - Page 6 If connecting to a skimmer, choose the skimmer located Hose Hose closest to the center of the longest pool 90° Adapter wall. Safety Valve Safety Valve Skimmer Adapter Skimmer Adapter Remove the skimmer Vacum Vacum basket and push the Chamber Chamber male end of a Hose Section into the...
- Page 7 Operating above the MAX. may damage the Hybrid Cleaner. CAUTION Table 1: Flow Indicator Flow Indication Action In satisfactory range Connect the Hybrid Cleaner and begin the cleaning process. To correct the flow do one or more of the following: • Make sure that the water level of the pool reaches the skimmer.
-
Page 8: Cleaning Process
Cleaning Process ❙ The Hybrid Cleaner continues to clean your pool as long as the pool pump is operating. The time required to cover all pool surfaces depends on the pool size. In general, 1-2 hours are sufficient. During operation, refer to the indicator lights (Drawing G) on the cleaner to make sure that the Hybrid Cleaner is functioning properly (see table below). -
Page 9: Removal From The Pool And Storage
Removal from the Pool and Storage ❙ ❙ When you choose to remove the Hybrid Cleaner from the pool: Ensure to switch the pool pump OFF. Disconnect the Skimmer Adaptor from the suction line opening. Disconnect the Safety Valve. Disconnect the Hose Sections, pulling them slowly one-by- one out of the pool. - Page 10 The following are typical problems that might occur and possible solutions. Table 3: Troubleshooting Symptom Possible Solutions • Correct insufficient flow. (Refer to Table 1). • Remove the service opening cover on the Cleaner bottom The Cleaner does not move or moves slowly (Drawing L) and clean out any trapped debris (Drawing M).
-
Page 11: Scoresby, Australia
Customer Service line on 1300 367 866 in Australia, or 0800 654 333 in New Zealand, or send a written letter to Davey at the address listed below. On receipt of your claim, Davey will seek to resolve your difficulties or, if the product is faulty or defective, advise you on how to have your Davey product repaired, obtain a replacement or a refund. - Page 12 Website: davey.com.au Website: daveynz.co.nz Davey Water Products Pty Ltd Member of the GUD Group ABN 18 066 327 517 ® Davey is a registered trademark of Davey Water Products Pty Ltd. © Davey Water Products Pty Ltd 2013. P/N 402188...
Need help?
Do you have a question about the POOLSWEEPA Hybrid and is the answer not in the manual?
Questions and answers