Figure 7-16: Configure Cable Or Dhcp Settings Screen; Figure 7-17: Configure Dsl (Pppoe) Settings Screen - Linksys WRT54G3G User Manual

Wireless-G Router for 3G/UMTS Broadband
18. Select the Internet connection type you use: Cable (DHCP), DSL (PPPoE), or Static IP. Proceed to the
appropriate section for your Internet connection type.
NOTE: If the Internet connection type you use is not listed here, keep the default, Cable (DHCP)
for now, and click the Next button. After you have completed the Setup Wizard, go to "Chapter 8:
Configuring the Wireless-G Router for 3G/UMTS Broadband." You will use the Router's Web-
based Utility to configure the Internet connection type settings.
Cable (DHCP)
Click the Next button.
DSL (PPPoE)
User Name - Enter the User Name provided by your ISP.
Password - Enter the Password provided by your ISP.
Confirm - To confirm the Password, enter it again in this field.
Click the Next button to continue.
Chapter 5: Setting up the Wireless-G Router for Broadband WAN and 3G/UMTS or GPRS Ser-
vice

Figure 7-16: Configure Cable or DHCP Settings Screen

Figure 7-17: Configure DSL (PPPoE) Settings Screen

47