Advertisement
Getting Started
Remote Keyless Entry (RKE)
The RKE transmitter performs several remote functions and must be inside the vehicle to
operate the Volt.
Keyless Access
With the RKE transmitter within 3 ft. (1 m)
of the door, press the button on the door
handle to unlock the door. Press it again
within 5 seconds to unlock all doors.
Key Release
Press the side
button to
remove the
key, which
can be used
to unlock the
driver's door.
Unlock
Press to unlock
the driver's door.
Press again to unlock
all doors.
Press and hold to lower
all windows from outside
the vehicle.
To turn the window feature on/off, select
Settings > Vehicle > Remote Lock, Unlock,
Start > Remote Window Operation.
Lock
Press to lock all doors
4
Remote Start
Press the
Lock button and then press
and hold the
button until the turn
signal lamps flash to start the vehicle and
condition the passenger cabin tempera-
ture from outside. The heating or air con-
ditioning system and rear window defog-
ger (if needed) will turn on. Depending
on conditions and vehicle personalization
settings, the engine may start.
After entering the vehicle, press the
brake pedal and then press the
button before driving.
Note:
• Press and hold the
button until the parking lamps turn off
to cancel a remote start.
• Only two remote starts are allowed
between ignition cycles.
• It's RECOMMENDED to use this feature
when the vehicle is plugged in to allow
energy from the wall outlet to assist
in getting the cabin to a comfortable
temperature and to leave more battery
energy for driving.
Panic Alarm
Press and release to locate the vehicle.
Press and hold for 3 seconds to sound the
panic alarm.
See Keys, Doors and Windows in your Owner Manual.
POWER
Remote Start
Advertisement
