Orion TV19PL110D Operating Instructions Manual page 36

Connection to other equipment
3. Connecting an audio system
You can supply the TV sound to the stereo equipment (A) with the scart socket. Use a special scart cable
for the connection which sold at the accessory shop. (please consult your hi-fi instructions for details).
If you have a surround sound amplifier/decoder (B) with a coaxial digital input, you can connect the
Coaxial Digital Audio Output to it, using a suitable coaxial digital lead. This connection carries the audio
signal from this set's Digital channels only.
Note:
• The Bass/Treble/Balance adjustments (see
P.21) only function with the sound from the TV
speakers - it does not affect the audio output
sockets.
4. Connecting Video camera and Video recorder
Select the "MONITOR" option in the SETUP menu (see No.6 on page 37).
Select the AV2 input mode (see P.12). You can see the playback picture from video camera.
This signal is output via AV1 and can be recorded by video recorder.
With this arrangement, Video recorder will record exactly what is shown on the screen.
Note:
• If you have a camcorder with
S-video, use an S-video cable
instead of a standard video cable.
Do not connect both a standard
video cable and an S-video cable
at the same time, or the picture
performance will be unacceptable.
• When you input the PAL-M signal
to AV2 input, select AV COLOUR
setting to AUTO, otherwise the
monochrome images will be
displayed.
5. Connecting to a DVD player or other AV device with Component Video outputs
If your DVD player (or other device) has Component Video output jacks, use a suitable set of leads (RCA/
Phono) to connect these to the Component Video inputs on this TV as shown - it can greatly enhance
the picture quality and performance. Please remember that you will also need to connect separate leads
(RCA/Phono) for the audio signals. Select the COMPONENT input mode (see P.12).
TV (Left side view)
DVB-T DIGITAL
AUDIO
OUT
OUT
Pb
L
(MONO)
AUDIO
IN
Note:
• The Component Video input of this unit are for use with equipment which outputs interlaced signals (PAL:
36
576i/1080i or NTSC: 480i/1080i) and progressive signals (PAL: 576p/720p or NTSC: 480p/720p).
32G0146B_ENG.indd 36 32G0146B_ENG.indd 36
TV (Left side view)
TV (Back side view)
To COMPONENT IN
COMPONENT
Y
Video cable (not supplied)
Pr
R
Audio cable (not supplied)
AUDIO
TV (Left side view)
R
COAXIAL
DVB-T DIGITAL
AUDIO OUT
AUDIO
OUT
OUT
Pb
L
(MONO)
AUDIO
IN
TV (Back side view)
SCART
AV 1
(Scart-RCA cable, not supplied)
(Coaxial digital lead, not supplied)
(S-VIDEO cable, not supplied)
IN
S-VIDEO
L
(MONO)
(AV cable, not supplied)
AUDIO
VIDEO
R
AV 2
SCART IN
AV 1 PC/HDMI
HDMI
AUDIO
(SCART cable, not supplied)
Y Pb Pr
Audio output
DVD player
VIDEO
Stereo amplifier
AV 2
COMPONENT
Y
Pr
Audio input
R
IN
PC/HDMI
HDMI PC MONITOR
AUDIO
Surround sound amplifier system
Video camera to AV2
Playback
AV output
PC MONITOR
Video recorder to AV1
Recording
Component output
(A)
(B)
10/11/07 1:52:33 PM 10/11/07 1:52:33 PM