Table of Contents
Advertisement
User Manual of Network Mini PTZ Camera
you connect the wireless network you can change the default IP.
Steps:
1. Enter the TCP/IP configuration interface.
Configuration> Advanced Configuration> Network> TCP/IP
Or Configuration> Basic Configuration> Network> TCP/IP
2. Select the NIC as wlan.
3. Customize the IPv4 address, the IPv4 Subnet Mask and the Default Gateway.
The setting procedure is the same with that of LAN.
If you want to be assigned the IP address you can check the checkbox to enable
the DHCP.
© Hikvision
Figure 4-11 TCP/IP Settings
33
Advertisement
Table of Contents
