Table of Contents
Advertisement
8. Cleaning The poambo
The poambo consists of brushed aluminum which easily shows fingerprints or dust.
The best way to clean the poambo is using ordinary degreasing kitchen cleaner.
Please do not use solvents as they can remove the print of the front
and back plate!
The anodizing is very resistant to cleaning agents but one sees films remaining if
applied incorrectly. Spray a rag or preferably a microfiber cloth with cleaning agent
and distribute it in the brushing direction on the surfaces of the poambo. Rub evenly
over the entire surface until the agent is dried up. This way you get the typical streak-
free shine of the poambo.
Do not use oven cleaner or cleaning methods using abrasive
particles! They will scratch the only a few micrometers thick
anodizing!
Always make sure to unplug the poambo from the mains power
before cleaning! Too much detergent dripping into the interior of the
poambo may cause an electric shock!
12
Advertisement
Table of Contents
