Operating The Poambo; Connection To The Mains; Cabling Of The Audio Signals; Powering Up The Poambo - Finitus Poambo User Manual

7. Operating The poambo

Make sure the poambo is turned off before you connect the speaker or signal
cables.

7.1. Connection to the mains

Set up the poambo and connect it to an AC outlet. Be sure that your model fits your
country voltage.
Do not turn on the poambo yet.

7.2. Cabling of the audio signals

Now connect the outputs of your feeding device (preamp) to the inputs of the
poambo. Connect your speakers to the outputs of the poambo (speaker terminals).
Pay particular attention to the correct polarity, i.e. both speakers should be
connected with their positive terminal to the positive terminal of the poambo, so that
both speakers are working in phase.

7.3. Powering up the poambo

First make sure that the volume control of the preamplifier is set to minimum.
Now turn on the playback devices and your preamplifier and last the poambo.

7.4. Listening to music

Now its time to do what the poambo can do best...be musically!
Start playback on your playback device and turn the volume control of your
preamplifier slowly until a comfortable listening level is reached.
Please note that high listening levels can do harm to your sense of hearing!
11