Related Manuals for BSM Saturn M6
Summary of Contents for BSM Saturn M6
- Page 1 Car Alarm System Saturn The second cable of the siren is connected to GND! INSTALLATION MANUAL Car Alarm System Saturn The second cable of the siren is connected to GND! INSTALLATION MANUAL...
- Page 2 All system cables must be connected reliably to the corresponding cables of the car, by connec- SATURN M5 SATURN M6 tors or sticking and have to be isolated with qualitative izolirband or shrinkable folio. Take care to the connections to “ground”.
- Page 3 stays in mode of learning of a new remote control transmitter. again for leaving the self-test mode and entering the mode of programming the first shock sen- sor zone, release the service button .With N1 you increase the sensitivity and with N2 decrease it.The degrees of sensitiveness are 16 and when you reach the end of each corresponding direc- Note: tion the system produces a long tone.You can try the adjusment at any moment.By pressing of...
- Page 4 1 – Sound1 cal installation or the battery, which are leading to a fake produce of the current sensor. Due to that the client can turn on the alarm of the car in special mode without running the risk of fake 2 –...
- Page 5 18. Pager channel - if the function is enabled and the channel is activated, when the system 15 – Locking time (3.5/0.7сек ) alarms, without warning - it is used for activation of additional devices - pager or GSM module. 16 - Long lock The activation by pressing button N3 proceeds in the same way - the device can be tested with- 17 - Channel for windows roll-up...
-
Page 6: Functions Description
arms in 15 seconds Functions description 11. Disables and enables the current sensor 1,2,3,4 - Different siren sounds. If they are allowed more then one, the systems alarms altenate- ly. If any of sounds are allowed, only sound1 is working. 12.
Need help?
Do you have a question about the Saturn M6 and is the answer not in the manual?
Questions and answers