Table of Contents
Advertisement
Quick Links
from this signal till VALET button's releasing, after that
LED lights off.
XV. PANIC MODE
If the ignition switch is not in "ON" position and you
press #2 of RT, the system starts to alarm by siren and
flashes by blinkers. This mode is also convenient to find
car in large parking.
XVI. RANDOM CODE Keeloq®
Every time you press a button of your RT, it transmits
different code from the last transmitted, 50 % of bits in
random part of code word are different.
Every received code is not valid more and it will not
accept this code if it is received again. In case the button
of RT is pressed more, than 16 times, to be synchronized
the transmitter with the base unit, a button of RT has to be
pressed alternately (when the RT is in range of base unit).
The code change give you a warranty, that recorded
and transmitted code from your RT could not change the
status of your system.
from this signal till VALET button's releasing, after that
LED lights off.
XV. PANIC MODE
If the ignition switch is not in "ON" position and you
press #2 of RT, the system starts to alarm by siren and
flashes by blinkers. This mode is also convenient to find
car in large parking.
XVI. RANDOM CODE Keeloq®
Every time you press a button of your RT, it transmits
different code from the last transmitted, 50 % of bits in
random part of code word are different.
Every received code is not valid more and it will not
accept this code if it is received again. In case the button
of RT is pressed more, than 16 times, to be synchronized
the transmitter with the base unit, a button of RT has to be
pressed alternately (when the RT is in range of base unit).
The code change give you a warranty, that recorded
and transmitted code from your RT could not change the
status of your system.
16
16
c a r
a l a r m
OWNER'S MANUAL
c a r
a l a r m
OWNER'S MANUAL
Advertisement
Table of Contents
Related Manuals for BSM Max
Summary of Contents for BSM Max
- Page 1 from this signal till VALET button’s releasing, after that LED lights off. XV. PANIC MODE If the ignition switch is not in “ON” position and you press #2 of RT, the system starts to alarm by siren and flashes by blinkers. This mode is also convenient to find car in large parking.
- Page 2 “OFF” and release VALET but- OWNER‘S MANUAL – MAX ton. In this mode any sensor’s triggering will sounds by chirps and its number correspond to the triggered sen- Contents sor: 1 short chirp warning zone of shock sensor I.
- Page 3 B1 is using for arming and disarming the system, to XI. ERASING OF RT AND LEARNING OF choose programmable function for setting of long time for NEW ONE door lock, lock and unlock of the doors when ignition switch is On. To erase RT –...
- Page 4 Channel 1 (starter) and leaves to protect the doors only. If II. ARMING THE SYSTEM the door is open without disarming the system, it turn the You can arm the system in two ways: The first one is by engine off, interrupts the ignition and starts alarm. By #3 pressing #1 of RT when system is not in service mode always could be turned the engine off (switches the relay, and the ignition switch is not in “On”.
- Page 5 Cannel 2 is used for ignition interruption with external re- triggered, you hear two strong sounds and see two flashes lay (applied with MAX). If the function is not allowed, when by the blinkers. press #3 of RT Channel 2 switch the external relay on.
- Page 6 flash by blinkers is seen and if the central door lock is 9. Current sensor. Allowed or forbidden. connected the doors unlock. 10. Immobiliser. This function allows to prevent more If in previous Arm mode the system is been triggered by effectively the car from thieves.
- Page 7 22. Channel 2 is for third VI. AUTOMATIC TRANSMITTER VERIFI- ignition interruption or CATION when #3 is pressed 23. Remote engine starting Switch the ignition to “ON”, the LED flashes so much times, as number of RT are been learned. This function 24.
- Page 8 VIII. ADDITIONAL CHANNELS 1. Sound 1 1. They are used for “Remote Engine Start” function (see 2. Sound 2 Chapter X – function 23) 3. Sound 3 2. Third ignition interruption cut off which is turn off by 4. Lock/unlock time 3.5s.
Need help?
Do you have a question about the Max and is the answer not in the manual?
Questions and answers