Related Manuals for DynaColor DH820E
Summary of Contents for DynaColor DH820E
- Page 1 Integrated High Speed Dome Camera User’s Manual Indoor / Outdoor Ver 1.2 00P3DH720ZXSEA2...
-
Page 2: Table Of Contents
User’s Manual Table of Contents Overview ..........................2 Features ........................3 Package Contents ....................... 4 Dimension........................6 Camera Cabling ........................7 Product Application ...................... 7 Switch / Connector Definition ..................8 Communication Switch Setting ..................9 ID Setting ........................10 Camera Control Protocol Setting ................ -
Page 3: Overview
User’s Manual Overview The Dome Camera delivers up to 432x zoom ratio (A3 Model) to capture clear image in the distance. Continuous Auto Focus, Back Light Compensation, Auto Exposure and Digital Slow Shutter functions are provided for clear and high quality image. -
Page 4: Features
User’s Manual Features Precise and Accurate Performance Auto Calibration Preset accuracy of 0.225° Preset speed up to 400° /sec. Proportional Pan & Tilt Speed Preset Position / Sequence / Auto-Pan / Cruise Dynamic Applications Multi-language OSD ... -
Page 5: Package Contents
User’s Manual Package Contents Please check the box contains the items listed here. If any item is missing or has defects, DO NOT install or operate the product and contact your dealer for assistance. Indoor Dome Camera Package Hard Ceiling Mount M4 Screw (x4) Camera Body Optical Cover... - Page 6 User’s Manual Outdoor Dome Camera Package M3 Standard Screw (x1) M3 Security Screw (x1)* Dome Camera with M5 Standard Screw (x1) Outdoor Mount Kit M5 Security Screw (x1)* CD: Operation Manuals Quick Guide Waterproof Rubber Lubricant Security Torx* Optical Cover *Optional: For Vandal Proof Cover only.
-
Page 7: Dimension
User’s Manual Dimension Indoor Outdoor... -
Page 8: Camera Cabling
User’s Manual Camera Cabling Please follow the instructions below to complete SDI High Speed Dome Camera cable connections. Product Application Connect the Dome Camera to other devices as shown in the diagram to complete a video surveillance solution. NOTE: To extend the network distance up to 1.2 km (4000 feet) and to protect the connected devices, it is highly recommended to place a repeater at the mid-point. -
Page 9: Switch / Connector Definition
User’s Manual Switch / Connector Definition Configuring the Dome Camera’s ID and communication protocol are required before connecting the Dome Camera to other devices. The switches used for configuring these settings are located on the camera’s back plate. Additionally, the 22-Pin Connector for Data Cable connection and ISP Connector for firmware upgrade kit connection are also set on the back plate. -
Page 10: Communication Switch Setting
User’s Manual Communication Switch Setting The Camera’s communication switches are specified in the table below. SW 1 Communication Switch SW 2 RS-485 Setting SW 3 SW 4 SW 5 Reserved SW 6 Reserved RS-485 is the interface that communicates the Camera and its control device; for this reason, the RS-485 setup of the Camera and the control device must be the same. -
Page 11: Id Setting
User’s Manual ID Setting Please assign an ID number to a Camera if there is more than one Camera in the same network. The camera’s ID can be setup using the 10-bit ID Dip Switch, which is located on the Camera’s back plate. If the Camera’s ID number is 6, for instance, the ID switch SW 2 and SW 3 should be set to “ON”... -
Page 12: Camera Control Protocol Setting
User’s Manual Camera Control Protocol Setting Define the protocol you are going to use basing on the devices of your surveillance system. Generally, use one protocol even the devices are provided from different manufacturers. Please refer to the table below for all supported protocols with their matching switch numbers and baud rate and choose a protocol for your Camera. -
Page 13: Power Connector
User’s Manual Power Connector Please refer to the illustrations below for power connector definition before wiring. SW 1 AC24V_1 SW 2 SW 3 AC24V_2 Apply Alarm I/O The Camera supports 4 digital alarm inputs and 2 digital alarm outputs. Please make sure the alarm connections are properly wired before starting to configure alarm related settings. -
Page 14: Operation And Configuration
User’s Manual Operation and Configuration Display Format The information shown on the screen is described in terms of OSD display, position and function description in the table below. Function OSD Display Description Motion MOTION Alarm Detect Message Alarm ALARM 1 Alarm Message Auto Focus Mode Focus Modes... -
Page 15: Setup Id Display
User’s Manual Setup ID Display Press the direction key down to turn the MAIN MENU page from 1 to 2, and then the menu item <ID DISPLAY> will be shown on the top. Users are allowed to choose whether the Camera’s ID will be displayed on screen for identifying the domes. -
Page 16: Setup Time
User’s Manual STEP 4: Press the <CAMERA MENU> key (ENTER) on the keyboard to go into the editing page. TITLE SETTING: 01 EXIT SAVE DELETE TITLE: STEP 5: Choose a character with direction keys and then press the <CAMERA MENU> key (ENTER) to input. For example: <A> <CAMERA MENU>, <B>... -
Page 17: Setup Schedule
User’s Manual Setup Schedule The schedule function enables users to program a preset point or function (Sequence / Auto-pan / Cruise) automatically to perform in a specific period of time. SWITCH Select <ON> to enable or <OFF> to disable the schedule function. POINT ... -
Page 18: Appendix A: Technical Specification
User’s Manual Appendix A: Technical Specification A2 Model A3 Model Camera Image Sensor 1 / 4” Sony CCD Optical Zoom Digital Zoom 1 ~ 12x variable NTSC: 480k Effective Pixels PAL: 570k Horizontal Resolution 650 TVL Scanning System NTSC / PAL Synchronization Internal / Line Lock Video Output... - Page 19 User’s Manual General Environment Indoor / Outdoor Controller Interface RS-485 Indoor 0°C ~ 40°C (32°F ~ 104°F) Operating Temperature Outdoor - 40°C ~ 50°C (- 40°F ~ 122°F) ∅ 171.7 x 228.7 mm ∅ 6.7 x 9 in.) Indoor Dimension Outdoor ∅...
-
Page 20: Appendix B: Switch Settings Index Table
User’s Manual Appendix B: Switch Settings Index Table Please refer to the switch settings below for Mini Speed Dome Camera’s ID and protocol setup. Camera ID Setup SWITCH SETTING ID No. SW-1 SW-2 SW-3 SW-4 SW-5 SW-6 SW-7 SW-8 SW-9 SW-10... - Page 21 User’s Manual SWITCH SETTING ID No. SW-1 SW-2 SW-3 SW-4 SW-5 SW-6 SW-7 SW-8 SW-9 SW-10...
- Page 22 User’s Manual SWITCH SETTING ID No. SW-1 SW-2 SW-3 SW-4 SW-5 SW-6 SW-7 SW-8 SW-9 SW-10...
- Page 23 User’s Manual SWITCH SETTING ID No. SW-1 SW-2 SW-3 SW-4 SW-5 SW-6 SW-7 SW-8 SW-9 SW-10...
- Page 24 User’s Manual SWITCH SETTING ID No. SW-1 SW-2 SW-3 SW-4 SW-5 SW-6 SW-7 SW-8 SW-9 SW-10...
- Page 25 User’s Manual SWITCH SETTING ID No. SW-1 SW-2 SW-3 SW-4 SW-5 SW-6 SW-7 SW-8 SW-9 SW-10...
- Page 26 User’s Manual SWITCH SETTING ID No. SW-1 SW-2 SW-3 SW-4 SW-5 SW-6 SW-7 SW-8 SW-9 SW-10...
-
Page 27: Protocol Setup
User’s Manual Protocol Setup SWITCH SETTING Protocol No. SW-1 SW-2 SW-3 SW-4 SW-5 SW-6...
Need help?
Do you have a question about the DH820E and is the answer not in the manual?
Questions and answers