Program The Esc - Hobbytech epX2Buggy Instruction Manual

pROgRAM The eSC

1. Program Method
Note3: • In the program process, the motor will emit "Beep" tone at the same time when the LED is flashing.
• If the "N" is bigger than the number "5", we use a long time flash and long "Beep---" tone to represent "5", so it is
easy to identify the items of the big number.
For example, if the LED flashes as the following:
"A long time flash + a short time flash" (Motor sounds "Beep---Beep") = the No. 6 item
"A long time flash + 2 short time flash" (Motor sounds "Beep---BeepBeep") = the No. 7 item
"A long time flash + 3 short time flash" (Motor sounds "Beep---BeepBeepBeep") = the No. 8 item ...... And so on.
Programmable Items list
Programmable
Items
Basic Items
1. Running Mode
2. Drag Brake Force
3. Low Voltage
Cut-Off Threshold
4. Start Mode (Punch)
5. Max Brake Force
10
(italic texts in the above form are the default settings)
1 2
Forward Only Forward/Reverse
with Brake with Brake
0% 5%
Non-Protection 2.6V/Cell
Level1 Level2
50%
25 %
Programmable Value
3 4
10% 20% 40%
3.0V 3.2V
2.8V/Cell
/Cell
/Cell
Level3 Level4 Level5
75% 100% Disable
5 6 7 8
60% 80% 100%
3.4V
/Cell
Level6 Level7 Level8 Level9
9