TALESUN TP672M-330 Installation Manual page 9

INSTALLATION MANUAL FOR CRYSTALLINE SOLAR PHOTOVOLTAIC MODULES
Module Type
TP672 series
TP660 series
TP648 series
TP572 series

Use a torque wrench for installation, and the compression for each clamps is not strong to avoid potential damages to
module frames. The recommended maximum compression for each clamp is 20MPa (2900PSI).

The module mounting structure must be made of durable, corrosion-resistant and UV-resistant material. All mounting
hardware (bolt/flat washer/split washer/nut) should be stainless steel M8 size.

The minimum recommended length for each clamp is 50mm.

The modules have been designed to resist a static load of 2400Pa , and the resistance value can decrease if modules
are not mounted following the instruction above.
Address: No. 1 Talesun Road, Changkun Industrial Park, Shajiabang Town, Changshu, Suzhou, Jiangsu Province, 215542, P.R.China
Website:
Module Dimension
Length*Width*Thickness
1960mm*990mm*40mm
1960mm*990mm*45mm
1960mm*990mm*50mm
1640mm*990mm*35mm
1640mm*990mm*40mm
1324mm*990mm*35mm
1324mm*990mm*40mm
1580mm*808mm*35mm
1580mm*808mm*40mm
ZHONGLI TALESUN SOLAR COMPANY LIMITED
www.talesun.com Email:
Version: A2
A
Load Distance from module
edge to clamping zone
2400Pa 400mm
5400Pa 400mm
2400Pa 400mm
5400Pa 400mm
2400Pa 400mm
5400Pa 400mm
2400Pa 250mm
5400Pa 250mm
2400Pa 250mm
5400Pa 250mm
2400Pa 200mm
5400Pa 200mm
2400Pa 200mm
5400Pa 200mm
2400Pa 200mm
5400Pa 200mm
2400Pa 200mm
5400Pa 200mm
Tel: +86 400 885 1098
sales@talesun.com
8 / 19
Effective Date: May 13, 2015
B
Clamping zone
100mm
100mm
100mm
100mm
100mm
100mm
100mm
100mm
100mm
100mm
100mm
100mm
100mm
100mm
150mm
150mm
150mm
150mm