Jarvis AN-10K1 User Manual
  1. Manuals
  2. Brands
  3. Jarvis Manuals
  4. Power Tool
  5. AN-10K1
  6. User manual

Jarvis AN-10K1 User Manual

Pneumatic stunner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EQUIPMENT
SELECTION
. . . . . . . . . . . . .
. . . . . . . .
AN--10K1 Stunner
Model AST--100 Tester
Filter / Regulator / Lubricator
. . . . . . . . . . . . . .
Balancer
JARVIS
6244001:
Model AN- -10K1
Pneumatic Stunner
Ordering No.
4044003
. . . . . . .
4016003
. . .
3022100
4042045
®
TABLE OF
CONTENTS
. . . . . . . . . . . . . . . . . . . . . . . . .
• Notice to Employer and Safety Director
• Notice to Operators, Maintenance
and Cleanup Personnel
• Parts Diagram and List
• Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Installation Instructions
• Operation Instructions
• Maintenance Instructions
• Trouble Shooting Chart
PRODUCTS CORPORATION
33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926
UNITED STATES OF AMERICA
TEL. 860--347--7271
FAX. 860--347--6978
. . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
jarvis.products.corp@snet.net
E--MAIL.
arvisproducts.com
WWW. j
Page
2
3
4
6
6
7
7
11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AN-10K1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Jarvis AN-10K1

Summary of Contents for Jarvis AN-10K1

  • Page 1 ....Balancer 4042045 • Trouble Shooting Chart ....JARVIS PRODUCTS CORPORATION ® 33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926 jarvis.products.corp@snet.net UNITED STATES OF AMERICA E--MAIL.

  • Page 2: Notice To Employer And Safety Director

    10. Avoid injury. Do not permit the tool to be misused. 11. If you resell or distribute a Jarvis product, you must provide the purchaser with the appropriate safety sheets and tool brochure. Additional copies of safety sheets and tool brochures will be provided upon request.

  • Page 3: Notice To Operators, Maintenance And Cleanup Personnel

    7. Test the tool prior to use or daily. Using the Jarvis Stunner Tester is the preferred testing method; howev- er the following procedure can also be used: Squeeze the trigger and depress the trigger contact bushing against an unmounted rubber tire to activate the tool.

  • Page 4: Parts Diagram And List

    4 of 12 Figure A 17 18 19 20 21 * Tighten to 56 lbf--ft (76 N--m) ** Tighten to 7.4 lbf--ft (10 N--m) JARVIS PRODUCTS CORPORATION ® 33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926 jarvis.products.corp@snet.net UNITED STATES OF AMERICA E--MAIL.
  • Page 5 Reducing Bushing 1011185 Quick Connect Plug 3035071 Seal Kit (items 8, 12, 17--20, 1007359 Hex Lock Nut 24, 28--30, 32 ,51--53 & 57) JARVIS PRODUCTS CORPORATION ® 33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926 jarvis.products.corp@snet.net UNITED STATES OF AMERICA E--MAIL. 6244001: arvisproducts.com...

  • Page 6: Specifications

    . Adjust the lubricator to obtain approximately one 2.1 Install a balancer over the stunning box to sus- drop of oil for every three uses of the stunner. pend AN- -10K1. Jarvis part number 4042045 is available. 5 Connect stunner to air pressure line:...

  • Page 7: Operation Instructions

    ALWAYS DISCONNECT THE AIR SUPPLY IN ACCOR- 2.2 Make sure the tool is working correctly. Use DANCE WITH OSHA’S LOCKOUT/TAGOUT PROCE- Jarvis AST- -100 Stunner Tester to insure pene- DURES (29 CFR 1910.147) BEFORE PERFORMING ANY trating shaft (item 27) is traveling at the proper MAINTENANCE OR REPAIRS.

  • Page 8: Maintenance Instructions

    3.3 Remove socket head screws (item 60) that secure 5.7 Remove sliding valve (item 22), housing cylin- housing cover (item 58) to unit. der (item 30) and muffler (item 31). JARVIS PRODUCTS CORPORATION ® 33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926 jarvis.products.corp@snet.net...
  • Page 9 (item 13) is adjusted to 0.60/0.63 in 10.1.2 Make sure cylinder cover (item 7) is properly (15/16 mm). Refer to Figure 3. seated on hanger bracket (item 5). JARVIS PRODUCTS CORPORATION ® 33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926 jarvis.products.corp@snet.net UNITED STATES OF AMERICA E--MAIL.
  • Page 10 10.1.3 Install and tighten hex lock nuts (item 46) 10.1.4 Install and tighten hex head screws (item 3) to 7.4 lbf- -ft (10 N- -m). to 56 lbf- -ft (76 N- -m). JARVIS PRODUCTS CORPORATION ® 33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926 jarvis.products.corp@snet.net...

  • Page 11: Trouble Shooting Chart

    Replace release valve assy. valve assembly (item 37) Release valve assy. (item 37) Adjust release valve assembly See Figure 3, page 9 needs adjustment JARVIS PRODUCTS CORPORATION ® 33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926 jarvis.products.corp@snet.net UNITED STATES OF AMERICA E--MAIL.
  • Page 12 Model AN--10K1 page 12 of 12 PRODUCTS CORPORATION JARVIS JARVIS PRODUCTS CORPORATION ® PRODUCTS CORPORATION ® 33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926 33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926 jarvis.products.corp@snet.net UNITED STATES OF AMERICA E--MAIL. jarvis.products.corp@snet.net UNITED STATES OF AMERICA E--MAIL.

Table of Contents