Advertisement
BEEP/FLASH JUMPER
The arm/disarm annunciator may be changed from blink lights to a blinking lights and beep combination. In the STANDBY MODE,
momentarily short the pins labeled BEEP/FLASH JUMPER. The lights will flash or the siren will beep to indicate the current mode. To
change the mode, short the pins until the beep or flash indicator changes to the desired state. Remove the short to keep the
selection. The lights will flash or the siren will beep to indicate the selection is complete.
AUTOMATIC BATTERY TESTER
A circuit has been added to the board that measures the battery voltage and gives an alarm signal if the charge is low (battery
voltage <= approximately 11volts). The battery is tested when the alarm is armed and disarmed. If the battery is discharged, the
siren will beep with 3 sets of 2 quick beeps to distinguish the beeping from any other beep alert. The beeps will sound after the
arming or disarming beeps or flashes. The alarm may continue to function for a while with a discharged battery, but the siren and
lights may not function properly and the battery may be permanently damaged and its lifetime shortened. To prolong battery life, it
is a good idea to keep the battery charged.
Warranty
Trailer Alarms, LLC promises to the ORIGINAL PURCHASER to repair or replace (with a comparable model or repair at Trailer Alarms,
LLC sole discretion) the electronic control module which proves to be defective in workmanship or material under normal use for 5
years from the original date of purchase. If warranty service is necessary you must have a clean copy of your sales receipt and
contact us for and RMA before sending the unit back.
NOTE: Trailer Alarms, LLC specifically limits this warranty to no more than two repairs or replacements, as specified above, over the
five year warranty period.
This warranty is void if the product has been damaged by accident, unreasonable use, neglect, improper service or other causes not
arising out of defects in materials or construction. This warranty is nontransferable and does not apply to any unit that has been
modified or used in a manner contrary to its intended purpose and does not cover batteries.
The unit in question must be returned to the manufacturer, postage prepaid. This warranty does not cover labor costs for the
removal, diagnosis, troubleshooting, removal or installation of the unit.
These systems are a deterrent against possible theft. Trailer Alarms, LLC is not offering a guarantee or insuring against the theft of
the trailer or its contents, and disclaims any liability for the theft of the trailer and/or its contents. Trailer Alarms, LLC does not
authorize any person to create for it any other obligation or liability in connection with the security system.
"TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUDED BY THE MANUFACTURER AND EACH
ENTITY PARTICIPATING IN THE STREAM OF COMMERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO, THE
EXCLUSION OF ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WARRANTY OF FITNESS FOR PARTICULAR
PURPOSE AND/OR ANY AND ALL WARRANTY OF NON-INFRINGEMENT OF PATENTS IN THE UNITED STATE OF AMERICA AND/OR
ABROAD. NEITHER THE MANUFACTURER OR ANY ENTITIES CONNECTED THEREWITH SHALL BE RESPONSIBLE OR LIABLE FOR ANY
DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, AND CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES
FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING,
THE ABOVE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED
ABOVE"
Important Note - A product's warranty is automatically void if its serial number is defaced, missing, or altered.
Serial #___________________
Date Installed ___/___/______
Purchased From:_________________________
Advertisement
