Table of Contents
Advertisement
2. After that, the search should begi
n and its status should be displayed.
3. Found cameras should be listed and simply select a camera from the list
and press "Configure".
4. It's corresponding information should be displayed in the "Camera
Information" section. Enter its username and password and select the channe
l
ID and name the camera.
5. Click on "Detect" to establish connection between the recorder and the
camera. If connection establishes
successfully, camera's de- tailed
information should be polled and display
ed as below.
6. Adjust its video format, fram
e ra
te, resolution or bitrate...etc if you wish
.
You can also click on the "Preview" to previ
ew the live video of the camera.
Click "Add" to finish adding the camera.
Advertisement
Table of Contents
