USER MANUAL Record serial no. of this dehumidifier in space provided below for future service and maintenance. Model: ED-12B Serial No:........Important: Keep a copy of your bill of sales and warranty card for future service. If service is performed, it is in your best interest to obtain and keep all receipts.
- 3 - - 4 - 13. When the supply cord is damaged, it must be replaced by the Read all instructions before using this dehumidifier. To reduce the risk of fire, electric manufacturer, its service agent or similarly qualified persons shock, or injury to persons when using your dehumidifier, follow basic precaustions, in order to avoid a hazard.
- 5 - - 6 - OPERATION INSTRUCTION PRODUCT IDENTIFICATION Starting the unit 1. Firstly, turn the humidity control switch to the “OFF” position. 2. Plug in the dehumidifier. 3. Turn on the humidity control switch (to right side) and turn the same switch to the desired humidity level (ex: 65% in general).
Page 4
- 7 - - 8 - unit still does not starts in 10 minutes, please contact your local FILTER REMOVAL distributor service station for repair. •The filter can be removed from its slot 8. When the dehumidifier is in operation, the running compressor will produce heat and make the room temperature higher.
40 degrees C. R134A is a kind of fluorinated greenhouse gases covered by the Kyoto Protocol. Its total global warming potential (GWP) is 1300 SPECIFICATIONS MODEL ED-12B SPECIFICATION POWER SUPPLY 1Phase, 220-240V~50Hz POWER INPUT...