Related Manuals for German Light Products Max 250 ELC
Summary of Contents for German Light Products Max 250 ELC
- Page 1 250 ELC Instruction Manual From Version 1.1 email: service@glp.de Internet: http://www.glp.de...
- Page 2 German Light Production (V2.1)
-
Page 3: Table Of Contents
Contents Introduction ......................4 1.1 Safety rules ....................... 5 Installation ....................... 6 2.1 Mounting ......................6 2.2 Secure the Max ....................6 2.3 Connectors ....................... 6 2.3.1 AC Connector ..................6 2.3.2 DMX ....................... 6 2.4 Fuses ........................ 6 Selecting Address/Basic Functions ..............7 3.1 Adjust the DMX-Address .................. -
Page 4: Introduction
Introduction Illustration 1-1 German Light Production (V2.1) -
Page 5: Safety Rules
1.1 Safety rules x is a High-Tech Product. To guarantee a smooth operation, it is necessary to keep following rules. 1. Make sure that Head and Arm of the x , can rotate without any mechanical problems and that all fan openings are clean and not blocked by anything. 2. -
Page 6: Installation
Installation 2.1 Mounting Mount clamps and/or hooks directly to the base plate. Please make sure to use right sized clamps and hooks and fit them securely. x is fully operational whether it stands, hangs or is mounted to the wall. Using the x standing on the ground requires a rough but even surface. -
Page 7: Selecting Address/Basic Functions
Address/Basic Functions Selecting Adjust DMX-Address and basic functions before connecting the x to AC Power !!! 3.1 Adjust the DMX-Address Address max 1 DMX Address max 2 DMX Address max 3 DMX Address max 4 DMX Address max 5 DMX Address max 6 DMX Address max 7... -
Page 8: Special Function
3.2 Special Function 3.2.1 Sound function Sound controlled run of factory stored programs is possible by switching the DMX Address at first x as seen in the picture below. Set the Dip switches of any other connected x to OFF. Address 1 2 3 4 5 6 7 3.2.2 Standalone Function... -
Page 9: Channel Selection ( Overview Table )
Channel selection ( Overview table ) Channel Description DMX-Value Hex- Value Value in % Armposition 0 - 255 0 - FF 0 – 100 1) Pan 2) Tilt Headposition 0 - 255 0 - FF 0 – 100 Armspeed 1/8min-2/sec 0 - 255 0 - FF 0 –... - Page 10 Channel Description DMX-Value Hex- Value Value in % orange 306 64 - 67 40 - 43 Halfcolor 9 68 - 71 44 - 47 red 304 72 - 75 48 - 4B Halfcolor 10 76 - 79 4C - 4F pink 303 80 - 83 50 - 53...
- Page 11 Channel Description DMX-Value Hex- Value Value in % Gobo 15 112 - 119 70 - 77 Gobo 16 120 - 127 78 - 7F Gobo 17 128 - 135 80 - 87 Gobo 18 136 - 143 88 - 8F Gobo 19 144 - 151 90 - 97...
-
Page 12: Change The Lamp
Change the Lamp For a hassle free change of the Light bulb, it is absolutely necessary to follow all descriptions in this chapter step by step. 5.1 Safety rules Unplug AC power connection Allow to cool (over 30 minutes) Don’t touch lamp with bare fingers. Close the x before you connect the AC power! 5.2 How to change the lamp... -
Page 13: Maintenance The Max
Maintenance the MAX The cleaning of the inner optical System, color filters and color correction filter should be done by qualified person only! Contact your local GLP Dealer for details. ATTENTION:Use no strong detergents, acid etc. for cleaning the case !!! 6.1 Optical System Clean the x optical system with a moistened cloth and a little cleaner. -
Page 14: Technical Data /Overview
Technical Data /Overview ♦ Supply data 230/120 Volt 5x20 3.15AT/6.3AT ♦ Lamp: 24V 250W ELC GX 5,3 ♦ DMX 512 Standard ♦ Weight 13.5 kg ♦ Dimensions: 240 x 335 x 430 mm ♦ 21 gobos ♦ 20 dichroitic colors ♦... - Page 15 German Light Production (V2.1)
Need help?
Do you have a question about the Max 250 ELC and is the answer not in the manual?
Questions and answers