Related Manuals for German Light Products Junior Scan 2
Summary of Contents for German Light Products Junior Scan 2
- Page 1 Instruction Manual from software version 1.0 (instruction version 1.3) email: service@glp.de Internet: http://www.GLP.de...
- Page 2 German Light Production (V1.3)
-
Page 3: Table Of Contents
Table of contents Description of Device....................3 1.1 Safety Instructions ....................4 Installation .......................5 2.1 Mounting ......................5 2.2 Secure the 2 ................5 2.3 Connectors .......................5 2.3.1 AC Connectors ..................5 2.3.2 DMX .......................5 2.4 Fuse........................5 The Menu Field / Functions ..................6 3.1 Adjust the DMX- Address..................6 3.2 Special Functions....................6 3.2.1 Reset Function ..................6 3.2.2 Sound Function ..................6... -
Page 4: Description Of Device
Description of Device Illustration 1-1 German Light Production (V1.3) -
Page 5: Safety Instructions
1.1 Safety Instructions 2 is a High-Tech Product. To guarantee a smooth operation, it is necessary to keep following rules. The manufacturer of this device will not take responsibility of damages through disregard of the information in this manual. Warranty adjustments will be cancelled. 1. -
Page 6: Installation
2 Installation 2.1 Mounting Mount clamps and/or hooks directly to the bow of the . Please make sure to use right sized clamps and hooks and fit them securely. Keep a safety distance of 0.5 m towards any easy inflammable materials (decoration etc.). Pay attention to the regulations of: BGV C1 (former VBG 70) and DIN VDE 0711-217 ! The installation should be done by qualified staff only. -
Page 7: The Menu Field / Functions
3 The Menu Field / Functions You can adjust the DMX address of the 2 directly at the menu field. 3.1 Adjust the DMX- Address Right after turning on the 2 and the first reset, you see the current DMX- Address. Use the first? button for the "first digit", the second button for the "second digit"... -
Page 8: Lamp On / Off
digit) while switching on the 2 . The display reads only "rST" (Reset). 3.2.3 Lamp ON / OFF The lamp of the 2 can be switched off via DMX signal. For this please bring DMX channel no. 9 (Special) to a value between 230 - 249 and DMX channel no. -
Page 9: Dmx Channel Selection (Dmx Protocol)
4 DMX Channel Selection (DMX Protocol) Channel Function DMX-value Hex-value Value in % 1) Pan Pan- Position 0 - 255 0 - FF 0 – 100% 2) Tilt Tilt- Position 0 - 255 0 - FF 0 – 100% white / open 3) Color 0 -3 0 - 3... - Page 10 Channel Function DMX-value Hex-value Value in % Multicolor 1 128 - 131 80 - 83 Half-Color 17 132 - 135 84 - 87 Multicolor 2 136 - 139 8 - 8B Rotation, slow - fast 140 - 253 8C - FD 54 - 98% music color chaser (slow) music color chaser (fast)
- Page 11 Channel Function DMX-value Hex-value Value in % Shutter open 240 - 255 F0 - FF 94 - 100% Lamp ON (ignition) 254 - 255 FD - FF 100% 6) Speed Pan/Tilt, relative 0 - 1 00 - 01 0 - 1% Pan/Tilt, slow - fast 2 - 255 02 - FF...
-
Page 12: Changing The Lamp
5 Changing the lamp For a frictionless operation please read this chapter carefully and follow all instructions. 5.1 Safety regulations • Pull out the main plug! • Wait at least 20 minutes after the last operation to cool down the fixture. •... -
Page 13: Changing The Gobos
6 Changing the Gobos You can change two Gobos of your own choice. Please pay attention on the following specifications and procedures. Gobo diameter: 13,8mm Gobo picture diameter: 12,5mm Gobo thickness: ~0,2mm (glass)- or steel Gobos can be used. 6.1 Safety Regulations •... -
Page 14: Maintenance And Cleaning The J U N I O R S C A N 2
7 Maintenance and Cleaning the It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not built up on or within the fixture. Otherwise the fixture's light-output will be significantly reduced. Regular cleaning will not only ensure the maximum light- output, but will also allow the fixture to function reliably throughout its life. -
Page 15: Technical Specifications
8 Technical Specifications • Power Supply 230Volt: 5x20 2,0AT / 150V: 5x20 4,0AT • Lamp: HSD 150/70, 3000h, 7000k or CDM/SA-T 150W, 6000h, 4200k • DMX 512 Standard • Pan 230° / Tilt 110° • 15 colors + white • 2x multi color effects •... - Page 16 German Light Production (V1.3)
Need help?
Do you have a question about the Junior Scan 2 and is the answer not in the manual?
Questions and answers