Craftsman 138.98946 Operator's Manual page 25

REVERSING THE GUIDE BAR
[] Remove the chain from the bar and turn the
bar over.
NOTE: Bottom of bar should not be on top.
[] Replace the chain on the bar. Refer to As=
sernbling the Bar and Chain earlier in this
manual for specific information.
[] Tighten the screw with your finger.
[] From the finger-tight position, tighten the
screw an additional 3/4 of a turn using a
wrench.
,_ WARNING: Remove the battery pack and
make sure the chain has stopped before
you do any work or making any adjustments
on the saw. Failure to do so may result in
accidental starting and possible serious
injury.
TRANSPORTING AND STORING
See figure 41.
[] Do not store or transport the chain saw when
it is running. The chain saw should always be
idle before storing or transporting.
[] Always place the chain cover on the bar and
chain before storing or transporting the chain
saw. Use caution to avoid the sharp teeth of
the chain.
[] Clean the chain saw thoroughly before stor-
ing. Store the chain saw indoors, in a dry
place that is locked and/or inaccessible to
children.
[] Keep away from corrosive agents such as
garden chemicals and de-icing salts.
25 - English