GE GPS12FGHBBB Owner's Manual And Installation Instructions page 5

About ice service.
GEAppliances.com
Ice Trays
To make ice, fill the ice tray with water and set
it on a level surface in the freezer compartment,
Ice cubes will form in a few hours,
To release ice cubes, turn the tray upside down,
hold it over a container and twist both ends,
For only one or two ice cubes, leave the tray
right-side up, twist both ends slightly and
remove as many cubes as you want,
Wash ice trays in lukewarm water only-
do not put them in an automatic dishwasher,
Ice maker Accessory Kit
An ice maker accessory kit is available from
your dealer, The IM-4D or IM-6D accessory
kit will work with your refrigerator, To
order, go to GEApplianceparts,com or call
800,626,2002, In Canada call 800,661,1 616,
NOTE: The step shelf in the freezer MUST be
placed in the lowest position when the ice
maker is installed,
The water valve cover assembly that
came with the Owner's Manual must be
installed when installing the optional ice
maker kit, Please call 1-800-432-2737 and
order part WR13X20070 if the water valve
cover assembly is missing, In Canada, call
800,561,3344,
Water Supply Kits
Kits containing copper tubing, shutoff valve,
fittings and instructions needed to connect the
ice maker to your cold water line are available
at extra cost from your dealer or from Parts and
Accessories, In the U,S,,call 800,626,2002, In
Canada, call 800,661,1616